Series 5 dash/gauges work in series 4??
10-06-02, 12:53 PM
#1
Full Member
Thread Starter
Join Date: Mar 2001
Location: Adelaide, SA, Australia
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Series 5 dash/gauges work in series 4??
Would all the instruments/gauges from a series 5 work in a series 4?
I have found a series 5 assembly with white gauges and want to fit it to my series 4.
I have found a series 5 assembly with white gauges and want to fit it to my series 4.
10-06-02, 08:12 PM
#2
Former Moderator. RIP Icemark.
Covered quite a few times, you may wish to search next time.
To swap them you will need either the series 5 gauge harness or re-wire the series 4 gauge harness to the series 5 pin outs.
Mechanically they are the same size and shape.
To swap them you will need either the series 5 gauge harness or re-wire the series 4 gauge harness to the series 5 pin outs.
Mechanically they are the same size and shape.
Last edited by Icemark; 10-06-02 at 08:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM