2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

SEARCHED!!! WHeel offset help!

Thread Tools
 
Search this Thread
 
Old 03-26-08 | 03:56 PM
  #1  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
SEARCHED!!! WHeel offset help!

ok, so i searched already and cant find anything to help. I need help to see if the ICW Racing Trident wheel will fit on the FC. I can not find anything about the offset size of the wheel, and i know the lug pattern is fine, but im not sure if i will need spacers or what! anyone use this wheel, or know how to find that information?
Old 03-26-08 | 04:16 PM
  #3  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
Question

ok, just finally found out some numbers on the wheel... but i read up and i really dont get the whole offset stuff and all that... the wheel is

17 x 7.0 (+42mm) 4 x 100 / 4.50

so does this mean that the wheel wont stick out very far, and i will have to use spacers?

sorry for the newb q's
Old 03-26-08 | 04:36 PM
  #4  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
Fitment is also dependent on what tires you use.

I would use a 5mm spacer, at most; I am using 17x7 wheels with a +38mm offset, and they are a very nice fit.
Old 03-26-08 | 04:37 PM
  #5  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
oh, wow. those wheels won't work for you. I don't know where you heard the lug pattern is "fine", but the wheels you're looking at are a 4x100 bolt pattern. That is NOT right for ANY FC.
Old 03-26-08 | 04:45 PM
  #6  
VacavilleFC's Avatar
Rotary Enthusiast

 
Joined: May 2006
Posts: 1,081
Likes: 0
From: Vacaville Ca
why don't you save your money and do a 5lug brake swap??

you'll be happier than just having perty wheels on small brakes,
Old 03-26-08 | 05:04 PM
  #7  
jesusfreak's Avatar
87fc
 
Joined: Feb 2008
Posts: 30
Likes: 0
From: hermiston oregon
everybody I have spoke with said that the fc4 is 4x100? so your saying that this is wrong??
Old 03-26-08 | 06:59 PM
  #8  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 20
From: Rohnert Park CA
Originally Posted by 7fold
ok, just finally found out some numbers on the wheel... but i read up and i really dont get the whole offset stuff and all that... the wheel is

17 x 7.0 (+42mm) 4 x 100 / 4.50

so does this mean that the wheel wont stick out very far, and i will have to use spacers?

sorry for the newb q's
Those won't fit on a FC.

The 4 lug pattern is 114.3x4

the 42 ET offset is okay though since the stock offset is 40ET.
Old 03-26-08 | 07:00 PM
  #9  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 20
From: Rohnert Park CA
Originally Posted by jesusfreak
everybody I have spoke with said that the fc4 is 4x100? so your saying that this is wrong??
Yes... 100x4 is wrong for a FC... the stock 4 lug is 114.3x4
Old 03-26-08 | 09:02 PM
  #10  
red_dragon's Avatar
Senior Member
iTrader: (10)
 
Joined: May 2006
Posts: 628
Likes: 2
From: Bay Area, CA
100x4 is honda ricer pattern IIRC...
Old 03-26-08 | 09:13 PM
  #11  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
well, these wheels will fit either a 5x100 or 5x114.3. does that work?

my wheels are 5 LUG!
Old 03-26-08 | 09:16 PM
  #12  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
here is a pic,.
Attached Thumbnails SEARCHED!!! WHeel offset help!-icw-racingtrident.jpg  
Old 03-26-08 | 09:45 PM
  #13  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
Originally Posted by jesusfreak
everybody I have spoke with said that the fc4 is 4x100? so your saying that this is wrong??
Yes. Precisely. 4x100=/=4x114
Old 03-26-08 | 09:47 PM
  #14  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
Originally Posted by 7fold
well, these wheels will fit either a 5x100 or 5x114.3. does that work?

my wheels are 5 LUG!
dude, you just said you had a 4-lug car, did you not? you can't fit 5-lug wheels on a 4-lug configuration. 5x114.3 will work on a stock 5-lug configuration on an FC.


I don't know why I'm even bothering to explain this stuff; it's SO basic, and all covered in the wheel/tire fitment thread.
Old 03-26-08 | 09:48 PM
  #15  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
Originally Posted by MmSadda
Yes. Precisely. 4x100=/=4x114
i dont think you are getting it right for me tho... i have 5 lug wheels on right now already! i dont see what the problem is.
Old 03-26-08 | 09:50 PM
  #16  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
no, that was the other guy... i started this thread... i have the 5 lug wheels.. and i thought i read that the 5 lug size was 5x114.3
Old 03-26-08 | 09:50 PM
  #17  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
Damnit, it's NOT THAT HARD.

If your car is a 4-lug, it is 4x114.3
If you car is a 5-lug, it is a 5x114.3

If the wheels will fit what's on your car, with a 42 offset, they will work.
Old 03-26-08 | 09:51 PM
  #18  
MmSadda's Avatar
Rotary Freak
iTrader: (2)
 
Joined: Jul 2006
Posts: 1,595
Likes: 0
From: Columbus, OH
Originally Posted by 7fold
no, that was the other guy... i started this thread... i have the 5 lug wheels.. and i thought i read that the 5 lug size was 5x114.3
YES. 5x114.3
Old 03-26-08 | 09:55 PM
  #19  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
Originally Posted by MmSadda
YES. 5x114.3
hahahah... sorry,man thanks for the help tho
Old 03-27-08 | 12:03 AM
  #20  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 20
From: Rohnert Park CA
Originally Posted by 7fold
no, that was the other guy... i started this thread... i have the 5 lug wheels.. and i thought i read that the 5 lug size was 5x114.3
Then why did you post:
Originally Posted by 7fold
17 x 7.0 (+42mm) 4 x 100 / 4.50
asking if they would fit?
Old 03-27-08 | 01:42 AM
  #21  
7fold's Avatar
Thread Starter
Full Member
 
Joined: Feb 2008
Posts: 245
Likes: 0
From: capital of Oregon!
because i accidently posted the wrong link from the wheels site..

my bad. im not much of a car guy, just came over from bikes... ask me any question about a motorcycle and i will have it... ask me about certain car stuff, and i have no idea.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
85TIIDEVIL
2nd Generation Specific (1986-1992)
7
08-25-15 01:09 AM
MILOS7
3rd Generation Specific (1993-2002)
10
08-19-15 08:25 AM




All times are GMT -5. The time now is 08:26 AM.