![]() |
|
Originally Posted by robtechfabrications
saynotopistons...me and my buddy retardedspleen are planning one doind son trick LED stuff in the near future...we're gonna get a set of lights from the wrecker and come up with some badass and original...so LEDS are in the near future
Omixeo - the ebay auctions have expired. searched Ebay and couldnt find anything that meets my needs. |
I think LED's would look really good... However, I'm too lazy and they look so good regardless. :drool:
https://i6.photobucket.com/albums/y2.../7postable.jpg |
car... so beautiful.... should have brought poet..
|
Yah, that car is awesome looking. I think i might do this to my tails. Anyone know how easy/hard it is to take them apart and do this?
|
i did it.. the hardest part of it is taking them off.. i sat mine in front of a heater for 20 minutes or so. when i took them apart. i removed all the old glue stuck in between, after that i washed then tails thorughly with soap and water. then put them back together using a marine base sealent(sp?) and finished it off with come VHT clearcoat. =) eric is da man for this
|
those are hella clean mine are blacked out and i wish they weren't
|
Originally Posted by eriksseven
I think LED's would look really good... However, I'm too lazy and they look so good regardless. :drool:
https://i6.photobucket.com/albums/y2.../7postable.jpg damn thats hot.... think i might do that... what about led bulbs like these? http://www.lgtautomotive.com/shop/nf...alled_ex_9.jpg |
Originally Posted by SayNoToPistons
give us some updates when you get the chance!
erik, love the suede black on bronze, man after my own heart! if i wasnt doin the paintjob i am that was my second choice. |
20Bforme - i was searching for those on google!
http://lgtautomotive.com/shop/nfosco...5901c854c2306d |
erik, you just gat me a new background!
thanks! |
Heyyy, thanks for the compliments guys... It's gonna be even sweeter when you see it's new stance. :drool: I just finished installing a set of KYB AGX's and RS*R "race" springs. Not to mention the new clutch setup, IC setup, fuel setup and turbo. Woot!
|
yea i was gonna give you shit for bein a 4x4 but mine used to be like that...thing was monstertrucking...didnt realize how tall it was til i was at a meet and i had lowered seconds gens on both sides.
|
Haha, I know... The guy who took the photo gave me a little sneak preview of the way it *should* be. ;)
https://i6.photobucket.com/albums/y2...blelowered.jpg |
Originally Posted by SayNoToPistons
20Bforme - i was searching for those on google!
http://lgtautomotive.com/shop/nfosco...5901c854c2306d i also found those while doing a search... but the ones i posted came off ebay |
yea about the same height as mine...that'll look wickid! what exhaust is that?
|
The exhaust is dual Apexi N1's. I used to really not like them, but they've grown on me recently. :icon_tup:
|
yea im building my exhaust in a few weeks...SDJ header, borla xr1 and a 5zigen GN+ can...single exhaust....the dual n1s look good though
|
Just finished up a set for another forum member... Sooo clean. ;)
(don't mind the blurry pics) http://images1.snapfish.com/3477%3B7...4955%3A8nu0mrj http://images1.snapfish.com/3477%3B7...55%3A%3Anu0mrj |
someone polished s5 taillight lense :)
|
No polish--just magical taillight 'modernizing' skillz yo!
|
i did that to one, howd you get the glue to seperate easy, i almost broke the one i have
|
clear coat eh?!
so what kind of clear coat you use? AND what kind of siliconce or whatever you use to put em back together? looks REAL nice!! |
wow, those look really clean. I still want to see someone do something with S4 lights... otherwise I may have to...
|
The black car looks really good (great angle to show off the lights, too). As stupid as this sounds, this is the first time I've seen this done. I have another idea for the lights that would work very well with this and a flat-black car. Something very unconventional...
I like the blacked-out look on some cars but with flat black paint I don't like glossy blacked-out lights, so I've got an idea that may look pretty cool. |
I dont feel like reading 12 pages worth of posts, so im just gunna ask. Did anyone do a writeup for this?
|
Originally Posted by eriksseven
I think LED's would look really good... However, I'm too lazy and they look so good regardless. :drool:
https://i6.photobucket.com/albums/y2.../7postable.jpg |
Originally Posted by eriksseven
No polish--just magical taillight 'modernizing' skillz yo!
Originally Posted by Omixeo
I dont feel like reading 12 pages worth of posts, so im just gunna ask. Did anyone do a writeup for this?
|
Here are my s4's on my old Rex.. (damn dud bought it and put a V8 in her.. *tear*)
https://www.rx7club.com/attachment.p...postid=2516630 |
The taillights just posted are mine :) I should be recieving them on 8/14 -- Can't wait!
|
^ i thought you sold your 7s already....
|
Originally Posted by lsx257
speaking about converting the led s5 tailights is not that hard with spending a fair amount of time.
here are the led's that i used http://cgi.ebay.com/ebaymotors/Maxxi...31288951QQrdZ1 would say the hardest part is pulling the set apart. that glue used by mazda was meant to stay shut. best way i thought was to pull them apart. remove small screws and weatherstripping with heat gun. then bake them at 300 for 20mins. feel the platic get pliable. with a jig a setup, it would slowly push out the lenses while it was in the oven being heated. http://i27.photobucket.com/albums/c1...y/DSC01752.jpg the corner lense has hard bends, so start with the brake light lense. once taking apart time to place the led in and mount it. i just used epoxy, four min set time. the wiring part is easy to figure out since the led's i used were clearly labeled. theres only three, ground, brake and drving lights. replacing the lense: most of which just go back over the steps. http://i27.photobucket.com/albums/c1...y/DSC01765.jpg by the way this is not the way to correctly pull apart taillight lenses. http://i27.photobucket.com/albums/c1...y/IMG_7855.jpghere are the leds i used led maxxima i found maxxima's website. if you scroll down you will see the 4 inch LED light that LSX257 posted. http://maxxima.com/tl-stoptailturnlighting.html they also have other lights too. and found this... http://www.ledtrailerlights.com/stt/stt_M42320R.htm |
Originally Posted by SayNoToPistons
the exterior lense are clean. i thought you polished them.
|
Originally Posted by RRTEC
Here are my s4's on my old Rex.. (damn dud bought it and put a V8 in her.. *tear*)
https://www.rx7club.com/attachment.p...postid=2516630 http://images.snapfish.com/345794872...93%3A%3Cnu0mrj My first Turbo II has been ruined... |
Erik, what do you charge to do this conversion? You seem to have done a few, I'd rather have someone who's done a few, convert mine, I don't want to f- mine up.
J |
I've been doing them for $100.
If that sounds like a lot, consider the fact that materials cost over $20, and it takes me about 5 hours to get them taken apart, cleaned, dryed, put back together, sanded, cleaned, dryed, masked, painted, sanded, cleaned, dryed and clear-coated. I think it's a really fair cost. :) If you want me to do it, just send me a PM. I'm more than willing to do anyone's taillights. I had a really good time doing adrock's, simply because I love seeing the before and after. :bigthumb: |
2 Attachment(s)
Okay guys, here it is. I had this idea for a tail light mod, and then after reading this thread, I thought it would be great to do in conjunction with eriksseven's mod.
Problem is, I don't have an FC anymore (yet), but I wanted to try it and so I tried it on my GSX today. Turned out AWESOME. Before pics: |
5 Attachment(s)
Oh yes, don't mind the horribly dirty car (it's been sitting for 3 years).
After: |
1 Attachment(s)
Okay, and this is one crappy night-time pic I took with my laptop webcam at the track. It's horrible quality, I'll try to get some more night pics tomorrow.
|
Okay, now to explain a bit: I'm going to be painting the car flat black. I figured it might be cool to black out the lights, but I didn't want them shiny. I wanted them to appear almost flat black like the car (in fact, they really do look flat black, and if it was any closer I don't think the light would come through). So I came up with this idea of wrapping the lights with black pantyhose. So I bought a pair, and used one leg each on each light. It was very resilient and didn't tear at all, even though I was kind of rough with it. After the lights were wrapped (I just basically slid them into the leg), since they were still pretty red, I sprayed them with flat black paint.
In retrospect, a better idea would have been to use two legs on one light, but I didn't think about that til after I was done. The thing I like the most is that from the side, the lights look completely black. I tried to capture it in the pictures. I think this would be awesome to do along with the other mod on a flat-black FC. |
sorry, but did people look at you weird when they saw a dude buying a pair of panty hose?
Looks like its a better idea than spray tint since its removable. and when cops pull you over for tinting your taillights you can say "oh no, its just a pair of panty hose!" and start scratching it apart. |
I wonder how weather resistant pantyhose are...lol
|
Not a *huge* fan of the panty-hose mod, but I'll give you credit for a pretty good idea, lol.
|
Actually, my wife bought it for me. But I've bought tampons before so some panty hose is no biggie.
It's been raining a bit lately. The panty hose still looks as it originally did. I don't know how easy it'll be to clean or how much of a dirt magnet it'll be, but I really like the effect of the lights. I still need to get some LED bulbs in there. I was surprised at how much I like the look. I keep staring at my tail lights. It makes them look almost textured in a way. |
my gf tried to con me into getting tampons once...all she got was a ride to the store
|
Have fun washing the car, dude...you now have a "cloth" exterior :\
|
Nah, just cloth tail lights. It's not apparent from the pics, but the car is gutted, so it only takes about 2 minutes to remove the lights.
Besides, as you can probably tell, I don't wash it much as it is. :) |
i love having a gutted car
|
eriksseven, have you thought of polishing a set of S4 tails?
|
Originally Posted by eriksseven
Those bastards... Someone just put a V8 in my old Rx7 too! :eek: :mad:
http://images.snapfish.com/345794872...93%3A%3Cnu0mrj My first Turbo II has been ruined... :eek: Those BASTARDS! :stickpoke: |
All times are GMT -5. The time now is 03:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands