s5 5/6 port activation
#26
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Sureshot's mechanical test method:
Parts: A cheap boost gauge, some vac hose & T's.
To test them, T in a pressure gauge and blow into the tube to check at what pressure they open.
Then route the tube inside with the gage on the end, and do a test drive to see when they open.
This also works for the VDI.
Parts: A cheap boost gauge, some vac hose & T's.
To test them, T in a pressure gauge and blow into the tube to check at what pressure they open.
Then route the tube inside with the gage on the end, and do a test drive to see when they open.
This also works for the VDI.
#28
I am back
Thread Starter
Join Date: Sep 2003
Location: Highland, IL near St. Louis
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
Alright I unpluged the hose going to the pressure sensor one again and got the same result. Now where is the six port solenoid at and what does it look like? (I am not real sure because I can't see much in there and the only pic I have seen is a drawing in the FSM) Tell me what it looks like and I will pull the plug off it, when I get the plug off does it matter which side I ground or send the 12v to?
Thread
Thread Starter
Forum
Replies
Last Post