AC LINKS

Ok I know this is a common problem to some and a minor issue to others. I would like to know the quickest way to overcoming this so I can get my car up and running TODAY!! lol. I have my car ready to start up and wired up. But my s4 dash plug dont fit my s5 TII ecu. (duh) The S5 front engine harness is all hooked up from the ecu to the S5 engine. I need the quick fix!!!PLz..

black_88

this might not be the best idea but try cutting the plug off the s5 harness and soder on the s4 one. just an idea but dont take my word on it.

AC LINKS

This was the first exact idea that popped into my head. This to me makes a lot of since. But I need to know what wires changed on the s5 if any. Thanks Black 88.

Has anyone gone down this route? If so please help.

AC LINKS

Besides Black 88 I would like to thank everyone for NOTHING!!! But I got my problem resolved

fc3sfreek

iTrader: (6)

ur welcome :-)

jdm monkey

mind sharing? I'm in the same boat. Thanks

Big88chevy

iTrader: (5)

Same here any info would be helpful.

Jollyone

i have the schematics for this at my mechanics. You have to take the wiring diagrams for the S4 and 5 and repin/cut resolder everything. If you can wait a few days can post them. I have the schematics for the whole harness, they need to be recopied legibly and posted on here. Will get around to it eventually.
can pm me if you like.

Jollyone

it was about 20 hrs labor btw to figure out and execute. With the diagram in hand shouldn't be more than 5 hrs or so.