Digi7ech

iTrader: (1)

I'm wiring a S4 TII EFI harness to mate my NA interior harness as a backup/replacement

I can't pull the good harness out of my car and strip it to find the wires to use since it's my DD.

I couldn't find the 2 orange plugs pinout diagram in the FSM.
Does anyone have a list of the pins for NA and TII or the place in the FSM it's located?

Again. This is for the two Orange plugs not the yellow ones which plug into the ECU.

Specifically. I need the Water temp pinout I need to jump the TII pinout over to. Then the two alternator pins.

Thx

NZConvertible

For the temp gauge wiring look at the Meters & Warning System (page 50-40 for the circuits, next page for plugs).

For the alternator look at the Starting & Charging System (page 50-16 for Turbo, 50-18 for NA).

HAILERS

X-15 and X-16 are shown in the back of the wiring schematics I've posted those two plugs numerous time. Go do an ADVANCED SEARCH and put in X-15 as the words and HAILERS as the name. In one of those hundred threads are several pictures on the X -15 and X-16 sometimes called FEM-01 and FEM-02 on 88 series four cars. You can search for FEM-01 and FEM-02 and use HAILERS as the name and get several hundred hits on them also. Same plugs as X-15 and X-16.

Digi7ech

iTrader: (1)

excellent keywords to use!
Yeah you guys have covered it pretty well.

So I was going through my harness removing a lot of the unused plugs(solenoids and Emissions crap).

I was amazed at what actually went through there. I thought some of that stuff would be going to the ECU.