im having the same problem i got a 1987 engine with wiring harness do i need the solenoid resistor ???

 

pleaaseee helpp this is making me maddd

 

You can also check your AF sensor try taking off the air filter, and with the key at the ON position, push the flap with your fingers, if everything is working properly, the further in you push, you should be able yo hear the injectors working, if you don't listen to them working check the wiring or the AF itself

 

1- this thread is 6 years old
2- if you need help, don't jack someone elses thread, start your own.

 

well ihave thesame problem whats wrong with that??? im gonna try this monday and let him knowi was missin the solenoid thing hope this car runs

 

87 cars built in the first half of 87 and before should have a item called a solenoid resistor package and that package is located below the afm/filter and is bolted to the chassis. In other words you need to temp remove the afm/filter assy and look down to see if you have a silver box about six inches long with an electrical plug like the one I showed in the beginning of this thread. IF you have the box and there is a electrical connector on your new harness then plug your new harness to that silver box.

IF the silver box called a solenoid resistor is not there.............then most likely your car never had one and you don't need it and frankly your injectors should be getting power to them.

One simple way to see if the injectors are getting power is to pull the small plug off the ECU and with key ON see with a digital meter if the light green, light gree/black, light green/white and light green white wires have batt voltage on them. IF they do then the wiring to and from the injectors is good and the problem is another thing.

Digital meters can be had from Harbour Freight for ??? five to ten bucks. Real cheap and they will do for what is required on this job.

The chassis number of your car should indicate if you should have the solenoid resistor or not. IF you write back try to tell us the chassis number of your car. Should be on the door sill or on the plate in the engine bay.

I THINK cars with chassis numbers prior to -550168 all get the solenoid resistor package. Those after.........not.

 

hey hailers thank you for ur help .. i have a 88 car and my car didnt have a solenoid resistor package. now i have a extra car but its a 87 , now i bought the engine from a 87 with the wiriin harness came fromn a automatic (i dont think it matters) 2) i took the solenoid resistor from my 87 and plug it in and car still not run , im gettin spark but not fuel , everytime i put fluid start the car stars for couple secs...change injector plugs , new injectors ,new gas filter , gas pump sounds like its working , any other ideas ??? i check all the fuses i will get the chassis number tomorrow and i will let u know thank you soo much for ur help i took my car to a mechanic maybe u can give me ur number and i can have my mechanic call u and see if can do everything u tell him i dont know i want my car in the road really bad ... but thank you soo much my name is irwin by the way..

 

i think i need some high 460cc injectors...