RX 7 owner a few questions!!
12-07-05, 11:47 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2005
Location: Newmarket Suffolk UK
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RX 7 owner a few questions!!
hi ,i have recently aqquired an rx7 fc3s import from japan and would like to know about the windshield wiper switchmine only works on n01 speed,no intermittent,no speed 2,and no mist,would this be the switch only?
and also what engine oil grade and diff oil grade should i use?
one more question .
what mileage should an engine do before rebuild?mines done 62k
cheers.
David Turner
UK
many thanks to you all.
12-07-05, 01:50 PM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Check the FAQ link at the top of this forum. Covers all these common question.
Oil grades are found in the Factory Service Manual (links in FAQ) and owners manual.
Oil grades are found in the Factory Service Manual (links in FAQ) and owners manual.
12-07-05, 02:07 PM
#3
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Dave T
hi ,i have recently aqquired an rx7 fc3s import from japan and would like to know about the windshield wiper switchmine only works on n01 speed,no intermittent,no speed 2,and no mist,would this be the switch only?
and also what engine oil grade and diff oil grade should i use?
one more question .
what mileage should an engine do before rebuild?mines done 62k
cheers.
David Turner
UK
many thanks to you all.
02-08-06, 01:23 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2005
Location: Newmarket Suffolk UK
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
wiper fault was broken wire on connector block to wiper motor and rear wipers fault was blown fuse due to operation of wiper when frozen to rear screen.
switch was perfect and so are the three others i have aqqired to fix this fault.
switch was perfect and so are the three others i have aqqired to fix this fault.
Thread
Thread Starter
Forum
Replies
Last Post