Right Signal
#3
HAILERS
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
It sounds like a CPU problem if both the front and rear bulbs are good. The Flasher unit is inside the CPU, located near your left foot area. That is the unit that is clicking when you go left or right turn. See page 50-60 of the wiring diagrams.
There's a green/black and a green/white output wires on the CPU that power the left and right turn signal lights. Those same wires also feed the green lights in the combination meter to show your turning left or right. So if you see no RIGHT green light in the combinaton meter, then there is no output from the CPU to the right signal lights. You hear clicking, which means the lever is working when you go to signal right, it's just the FLASHER in the CPU is kaput.
Try this. Turn you HAZARD button to ON. Bet the right side won't work.
There's a green/black and a green/white output wires on the CPU that power the left and right turn signal lights. Those same wires also feed the green lights in the combination meter to show your turning left or right. So if you see no RIGHT green light in the combinaton meter, then there is no output from the CPU to the right signal lights. You hear clicking, which means the lever is working when you go to signal right, it's just the FLASHER in the CPU is kaput.
Try this. Turn you HAZARD button to ON. Bet the right side won't work.
Last edited by HAILERS; 08-28-08 at 08:23 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic MTX-L to adaptronic question
TeamRuffRacing
Adaptronic Engine Mgmt - AUS
1
09-30-15 08:13 PM