replacing battery cables....need help
06-08-03, 11:37 AM
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Fayetteville, NC
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
replacing battery cables....need help
I need to replace my battery cables, but i really dont have much experience. I definately dont want to spend money taking to it a mechanic.
Does anyone have a link or a writeup on how to do this.
The manual just says to trace the cable and replace them...but it seems more complicated than that.
Any help would be appreciated...thanks.
Does anyone have a link or a writeup on how to do this.
The manual just says to trace the cable and replace them...but it seems more complicated than that.
Any help would be appreciated...thanks.
06-08-03, 03:10 PM
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
It is that simple. Both go directly to the starter motor. The positive goes to the actual motor itself; the negative goes to one of its mouting bolts. The difficult part is extracting the cables from the loom, but that just takes time.
06-08-03, 10:15 PM
#4
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by NZConvertible
It is that simple. Both go directly to the starter motor. The positive goes to the actual motor itself; the negative goes to one of its mouting bolts. The difficult part is extracting the cables from the loom, but that just takes time.
It is that simple. Both go directly to the starter motor. The positive goes to the actual motor itself; the negative goes to one of its mouting bolts. The difficult part is extracting the cables from the loom, but that just takes time.
so.. relocating the battery wouldnt be as tough as i originally thought.. hmm..
are all the other wires spliced off at the starter area?
i had imagined the wires were actually spliced together near the battery, but i never looked closely..
06-08-03, 10:43 PM
#5
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally posted by Black13B
are all the other wires spliced off at the starter area?
are all the other wires spliced off at the starter area?
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM