rebuild stock harness 88t2
07-14-09, 09:25 AM
#1
mattg prob nt coming back
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: OrangePark FL
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
rebuild stock harness 88t2
hey guys im looking for a place to get my stock harness rebuilt. im going to switch to pfc and i would like a fresh harness. i know there was a company doing it where you sent in your old harness so they could rebuild it but i cant remember for the life of me who it was. thanks in advance
07-14-09, 09:51 AM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
DIYautotune had a Harness for their Megasquirt ECU's.
The harness is fairly cheap(a bout 65 bucks USD,if I recall correctly).
The thing is you have to Put the plugs/connectors on yourself.But everything is supposed to be Marked on the wires of their harness.
here ya go. http://www.diyautotune.com/catalog/m...ong-p-101.html
oh 40 bucks,even better!
The harness is fairly cheap(a bout 65 bucks USD,if I recall correctly).
The thing is you have to Put the plugs/connectors on yourself.But everything is supposed to be Marked on the wires of their harness.
here ya go. http://www.diyautotune.com/catalog/m...ong-p-101.html
oh 40 bucks,even better!
07-14-09, 12:06 PM
#3
mattg prob nt coming back
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: OrangePark FL
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
thanks for thelink but that is not what i was looking for. i need my whole harness rebuilt like new minus the maf and the emissions. does no one know the web site that does/did this?
07-14-09, 02:50 PM
#6
call Ray Crowe at Malloy Mazda. Malloy Mazda is a forum vendor that has really good discounts. 703-490-8170 is listed on their website. ask for mazda parts and then ask for Ray Crowe. He usually leaves at 4PM Eastern.
Find out whether your harness has low impedence injectors (resister pack) or high impedence injectors (no resistor) first. Or get the VIN number.
Find out whether your harness has low impedence injectors (resister pack) or high impedence injectors (no resistor) first. Or get the VIN number.
07-14-09, 03:54 PM
#7
Visual Kei
iTrader: (16)
Join Date: Nov 2005
Location: Mtns of NC/SC
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
Would an '88 have low impedance? Thought that was an early '87 thing only. Not trying to be rude I might have just been misinformed. Anywho, yeah if you go the route arghx recommended Ray Crowe is top notch a great guy. Been buying from him for a couple of years and have nothing but great things to say about him. Super nice guy that knows his stuff when it comes to 7's.
Trending Topics
09-04-09, 11:09 AM
#10
mattg prob nt coming back
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: OrangePark FL
Posts: 1,933
Likes: 0
Received 0 Likes
on
0 Posts
ok so i called ray today after all this time and he said there is no way to get a stock harness cause they dont make them anymore. i need another way or company 
09-04-09, 05:29 PM
#13
Dont know if this helps but here is a NEW turbo harness from Rhd Japan for a little over 1k
http://www.rhdjapan.com/jdm-low/Mazd...C3S-13BT-24314
http://www.rhdjapan.com/jdm-low/Mazd...C3S-13BT-24314
Thread
Thread Starter
Forum
Replies
Last Post