I ran into a little problem a couple months ago with the rear spindles. The bushings that is held in place on the spindle by a 21mm bolt disintegrated. I put in makeshift ones to get around but want to fix it right.

I wanted to know if there are any aftermarket bushings for the spindle, or do I have to get the whole spindle itself.

s4 4-lug
also, is there a kit to adjust to in rear as well as camber>???

 

You're talking about the DTSS bushing's. Eliminator bushings can be found at Mazdatrix.

http://www.mazdatrix.com/rmounts.htm

They're apparently temporarily unavailable (rear toe steer eliminators)

Camber and toe adjustment pieces are here:

http://www.awrracing.com/pages/rx/rxsusp.html