r1 lip on my FC
05-24-03, 04:13 PM
#4
The "Original SDRotary"
Thread Starter
Join Date: Apr 2003
Location: San Diego
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
It was not to bad. A little trimming and cutting and some bolt hole relocating. it took us about 30 minutes to do it. We are thinking about making some carbon copies but have not decided yet.
Trending Topics
05-24-03, 07:06 PM
#10
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
My opinion (take it as only that 
):
Neato...congrats on the work.
However, if you were going to produce copies, you need to address the issue of the corners...they hang over the lip...maybe a lil glass lay ontop for the mold piece?
Side 1/4 shot would be nice, as well as a side shot.
):Neato...congrats on the work.
However, if you were going to produce copies, you need to address the issue of the corners...they hang over the lip...maybe a lil glass lay ontop for the mold piece?
Side 1/4 shot would be nice, as well as a side shot.
05-26-03, 01:16 PM
#18
The "Original SDRotary"
Thread Starter
Join Date: Apr 2003
Location: San Diego
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
Photo shopped?? it would have taking me longer to photoshop it (not much of a computer guy) than it did to put it on, the owner of my shop got the 99 spec lip for his wife's car, and had the old lip lying around unused so after work we threw it on--
05-26-03, 09:23 PM
#21
Eat, sleep, work, mod.
Join Date: Jun 2001
Location: Long Island
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
really bad bc the S5 bumper cover has little "fangs" on either side that extend down from the grille meaning the Ri lip would have a nice gap at that sectin, not good.
