quick intake question if you please
09-05-03, 07:38 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Windsor Ontario Canada
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
quick intake question if you please
reinstalling my intake:
I think it's the intake temp sensor - to prong plug on top of throttle body next to TPS plug - does it matter which way it goes on? Its got a green and a black wire.
Thanks
I think it's the intake temp sensor - to prong plug on top of throttle body next to TPS plug - does it matter which way it goes on? Its got a green and a black wire.
Thanks
09-05-03, 02:09 PM
#5
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Anytime you're not sure about the polarity of a sensor, you can check it with a DVM.
If neither pin shows ground continuity, and there is no difference in ohm value when the pins are measured both ways, then (like many temp sensors) then is no specific polarity.
If neither pin shows ground continuity, and there is no difference in ohm value when the pins are measured both ways, then (like many temp sensors) then is no specific polarity.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM