question about pintle cap for injectors
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Jan 2004
Location: LOS ANGELES
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
question about pintle cap for injectors
well i've bought the pintle caps from mazdatrix and for some reason the hole is bigger on the new ones. is there a purpose for this? also i couldn't put the pintle cap on the injectors all the way is this a bad thing? i want to know before i start putting my car together, next u know i got leaky injectors =(
87 n/a se
87 n/a se
#5
Engine, Not Motor
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Ah, the pintle caps...
Yes, on the new caps the whole is bigger. Apparently, it helps with atomization...
To get them on, use your favourite petrolium based "personal" lubricant, and a small vice. Make SURE that the injector seats in the vice such that the pintle ends up between the grooves in the jaw. Now slowly tighten the vice until it "clicks".
I've done this a bunch of times, because those damn things always crack on me.
Yes, on the new caps the whole is bigger. Apparently, it helps with atomization...
To get them on, use your favourite petrolium based "personal" lubricant, and a small vice. Make SURE that the injector seats in the vice such that the pintle ends up between the grooves in the jaw. Now slowly tighten the vice until it "clicks".
I've done this a bunch of times, because those damn things always crack on me.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM