pulsation dampener elimination kit for sale now!!!!!!!!!!!
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
pulsation dampener elimination kit for sale now!!!!!!!!!!!
i have made a kit to rid of the dreaded pulsation dampner and stock fpr. the pic below shows this kit on s4 fuel rails primary and secondary. i am trying to sell with the lines, rails and even the injectors!! they are modified to fit in the secondary line already (uses stock o-rings and grommet) i want to sell all this for $500. i have more stuff i will post later. let me know what u guys think.
ps
the injectors are brand new from precision power. they are the boche 1300cc i think. i have reciepts. and the lines come with crush washers too.
ps
the injectors are brand new from precision power. they are the boche 1300cc i think. i have reciepts. and the lines come with crush washers too.
Last edited by fLyiNgOuFeR; 05-19-02 at 07:15 AM.
#4
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RETed
I'd like to know how this all works without an FPR?
How would someone control the 1300's?
-Ted
I'd like to know how this all works without an FPR?
How would someone control the 1300's?
-Ted
#6
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RETed
I'd like to know how this all works without an FPR?
How would someone control the 1300's?
-Ted
I'd like to know how this all works without an FPR?
How would someone control the 1300's?
-Ted
you guys hav'ta chack out this thread https://www.rx7club.com/forum/showth...736#post690736
alot more stuff.
Trending Topics
#8
Senior Member
Join Date: Feb 2001
Location: olympia,wash
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
i think i'll stick to the $8.- banjo bolt from summit and the free mpv pd i got from a friend
[of course i drive a n/a and am not to worried about more fuel/fuel pressure...]
[of course i drive a n/a and am not to worried about more fuel/fuel pressure...]
#9
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
Another way of doing it is to just re-drill and re-tap the fuel railes to pipethread, one end of both rails retaps to 1/4" npt while the other end will re-tap to 3/8 npt, then with about 8 bucks in brass fittings and some fuel line, you are done..Max
#10
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Maxthe7man
Another way of doing it is to just re-drill and re-tap the fuel railes to pipethread, one end of both rails retaps to 1/4" npt while the other end will re-tap to 3/8 npt, then with about 8 bucks in brass fittings and some fuel line, you are done..Max
Another way of doing it is to just re-drill and re-tap the fuel railes to pipethread, one end of both rails retaps to 1/4" npt while the other end will re-tap to 3/8 npt, then with about 8 bucks in brass fittings and some fuel line, you are done..Max
i think i'll stick to the $8.- banjo bolt from summit and the free mpv pd i got from a friend
#11
Lives on the Forum
Originally posted by Maxthe7man
Another way of doing it is to just re-drill and re-tap the fuel railes to pipethread, one end of both rails retaps to 1/4" npt while the other end will re-tap to 3/8 npt, then with about 8 bucks in brass fittings and some fuel line, you are done..Max
Another way of doing it is to just re-drill and re-tap the fuel railes to pipethread, one end of both rails retaps to 1/4" npt while the other end will re-tap to 3/8 npt, then with about 8 bucks in brass fittings and some fuel line, you are done..Max
-Ted
#16
Freedoms worth a buck o'5
Join Date: May 2001
Location: Calgary Alberta Canada
Posts: 2,544
Likes: 0
Received 1 Like
on
1 Post
Originally posted by RETed
Why bother...all the major AN fittings manufacturers offer metric to AN adapters...
-Ted
Why bother...all the major AN fittings manufacturers offer metric to AN adapters...
-Ted
#18
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,979
Received 2,687 Likes
on
1,902 Posts
you could also take a bolt from another fuel rail...
mike
mike
#20
I wish I was driving!
Originally posted by Maxthe7man
But not for 8 bucks though.. AN fittings are for people who don't know how to use a flaring tool properly..Max
But not for 8 bucks though.. AN fittings are for people who don't know how to use a flaring tool properly..Max
#21
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bwaits
Are you selling just this set or trying to sell retail?
Are you selling just this set or trying to sell retail?
#23
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by scathcart
In other words.... you'd make enough selling one set to do thast to your car for free?
In other words.... you'd make enough selling one set to do thast to your car for free?
#25
Senior Member
Thread Starter
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
anyone just wanna buy the primary fuel rail and compatble line? ($95)
i'll aslo just sell you the line(s) for $75 but you'll have to modifly your fuel rails yourself
i'll aslo just sell you the line(s) for $75 but you'll have to modifly your fuel rails yourself