progress pics of my 'vert
#30
ACBron Motorsport
Thread Starter
Originally posted by SeventhKevin
REVERT haha, i guess i'm slow, i got the Vert part. kekeke
REVERT haha, i guess i'm slow, i got the Vert part. kekeke
#38
ACBron Motorsport
Thread Starter
this is a little penguin that I found in the map pocket when I 1st got the car
I figured that since it had survived the tip from Japan I would but him on display
I figured that since it had survived the tip from Japan I would but him on display
#39
ACBron Motorsport
Thread Starter
and to balance out the ricey blue, my new (used) hiflow
its a v trim wheel in a machined out std copm cover, rear wheel is std with the wastegate ported as big as you can go with the std flap. and the intlet into the turbo is ported too
its a v trim wheel in a machined out std copm cover, rear wheel is std with the wastegate ported as big as you can go with the std flap. and the intlet into the turbo is ported too
Last edited by Adsy01; 04-16-03 at 03:19 AM.
#40
ACBron Motorsport
Thread Starter
i also modded the throttle body, just removed everything i could see that wasent needed then i came acrrose a site that said to do what i had just done, so i was happy about that.
more updates as they happen ;-)
more updates as they happen ;-)
#41
Full Member
Join Date: Mar 2003
Location: Wa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Ive got a couple for ya,
How were you able to take your AFM (air flow meter) off? I did not know you could bypass the system.
Also, how did you do all this with your injury?! It must have taken awhile or some help.
Good effort, I congratulate you.
How were you able to take your AFM (air flow meter) off? I did not know you could bypass the system.
Also, how did you do all this with your injury?! It must have taken awhile or some help.
Good effort, I congratulate you.
#42
ACBron Motorsport
Thread Starter
Originally posted by GTIguy
Ive got a couple for ya,
How were you able to take your AFM (air flow meter) off? I did not know you could bypass the system.
Also, how did you do all this with your injury?! It must have taken awhile or some help.
Good effort, I congratulate you.
Ive got a couple for ya,
How were you able to take your AFM (air flow meter) off? I did not know you could bypass the system.
Also, how did you do all this with your injury?! It must have taken awhile or some help.
Good effort, I congratulate you.
The MTX8 works off the TPS and a MAP sensor (built into the ECU) so the AFM isent needed
So far ive done most of the mods myself with help for anything heavy (like the battery relocation). Im lucky i have several good friends that are willing to help me that are into rotors as much as me.
it takes me forever compared to do stuff than it used to. I used to work as a mechanic so i find it very frustrating to take so long doing things, but at least i can still do them. I have a brace i wear on my arm/wrist too
Thread
Thread Starter
Forum
Replies
Last Post