Possible engine trouble
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2004
Location: On that highway to hell
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
![Exclamation](https://www.rx7club.com/images/icons/icon4.gif)
Well I got the car up and running and I can bring it to idle, the trick is if I press the gas at all, it will die out. I was told to search for vaccume leaks and I found two, one a giant hose on the back of the lower intake manafold against the firewall. The other the sub-zero cold start assist plate I made a year ago failed. I just patched those two up and with high hopes fired the beast up...only to have it preform in the exact same way. Any new ideas or thoughts would be helpfull as i'm running purly out of ideas at this stage.
#2
Bongolio
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Soo it starts fine and idles fine but if you step on the gas it dies?
I would check your TPS..If thats adjusted properly the i would go over all my vaccum lines again look at the FSM in the FAQ,learn the diagram and make sure it matches your car. Make sure everything is plugged in check your TB..
I would check your TPS..If thats adjusted properly the i would go over all my vaccum lines again look at the FSM in the FAQ,learn the diagram and make sure it matches your car. Make sure everything is plugged in check your TB..
Thread
Thread Starter
Forum
Replies
Last Post