Is it possible....
#1
Junior Member
Thread Starter
Join Date: Sep 2001
Location: Queens, NYC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Is it possible....
Is it possible to put the back seat from a 2+2 and put it into the back of a 2-seater? If so how hard is this to do and about how much would it cost?
#2
its possible
i did it on mine and it makes it look nicer
you need the bottom seat no bolts
the top has two bolts on the bottom
on the top left and right side it has some holders
so it can move the seat up and down for more cargo space
you will need to lossen the carpet by the speaker and make a 2" hold for the mounts
everything is a bolt-on you need a screw driver and a 12mm key
try your local junk yard i got mine for $20
but i need to get them re-done to black cloth
tell me if you have any ???
i did it on mine and it makes it look nicer
you need the bottom seat no bolts
the top has two bolts on the bottom
on the top left and right side it has some holders
so it can move the seat up and down for more cargo space
you will need to lossen the carpet by the speaker and make a 2" hold for the mounts
everything is a bolt-on you need a screw driver and a 12mm key
try your local junk yard i got mine for $20
but i need to get them re-done to black cloth
tell me if you have any ???
Thread
Thread Starter
Forum
Replies
Last Post
TheBigOne
2nd Generation Non-Technical and pictures
39
06-23-09 06:04 AM
Slow Rotor
Comments and Suggestions Archive
10
06-08-09 12:42 AM
turBRO240
3rd Generation Specific (1993-2002)
11
11-21-07 05:21 PM