pls state your opinion
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: kansas
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
pls state your opinion
1987 Mazda Rx7 Turbo II. 84,000 original miles ~ 400+ Horsepower ~
1989-91 - Series 5 conversion @ 75,000 miles
8 point roll cage
Lightweight racing wheels
ACT Extreeme Clutch - 6 Puck ( Unsprung)
1" lower in Rear
1.5" lower in Front
G-Force Reprogrammed ECU
SAFC
AVC-R
Greddy EGT Gauge
Boost Gauge
Greddy Fuel Pressure Gauge
Greddy Turbo Timer
550cc Primary Injectors
680cc Secondary Injectors
2 - Additional 550cc Injectors
SX Fuel Pressure Regulator
High Pressure Nip. Fuel pump
Relocated Battery
Greddy Front Mount Intercooler (The biggest one you can get in there)
Alum. Radiator (3 inch I think)
MSD-6A
NGK Racing Plugs
10mm Race Wires
T-04R Turbo (1.15 hot side)
HKS manifold
HKS wastegate (10psi spring)
Type R Blow Off Valve
Racing Beat Turbo Back Exhaust (Custom Down Pipe)
all of this on a no-rust 87 t2 body with no grinds on transmission , clean title and sun roof and other misc works , compression is around 105psi on each face each rotor
all for $4600 ... is it worth it...
if it is i will get it
car need a paint job and needs to be fined tuned.....hope to hear from u guys
1989-91 - Series 5 conversion @ 75,000 miles
8 point roll cage
Lightweight racing wheels
ACT Extreeme Clutch - 6 Puck ( Unsprung)
1" lower in Rear
1.5" lower in Front
G-Force Reprogrammed ECU
SAFC
AVC-R
Greddy EGT Gauge
Boost Gauge
Greddy Fuel Pressure Gauge
Greddy Turbo Timer
550cc Primary Injectors
680cc Secondary Injectors
2 - Additional 550cc Injectors
SX Fuel Pressure Regulator
High Pressure Nip. Fuel pump
Relocated Battery
Greddy Front Mount Intercooler (The biggest one you can get in there)
Alum. Radiator (3 inch I think)
MSD-6A
NGK Racing Plugs
10mm Race Wires
T-04R Turbo (1.15 hot side)
HKS manifold
HKS wastegate (10psi spring)
Type R Blow Off Valve
Racing Beat Turbo Back Exhaust (Custom Down Pipe)
all of this on a no-rust 87 t2 body with no grinds on transmission , clean title and sun roof and other misc works , compression is around 105psi on each face each rotor
all for $4600 ... is it worth it...
if it is i will get it
car need a paint job and needs to be fined tuned.....hope to hear from u guys
#6
Rotary Enthusiast
Join Date: May 2004
Location: SoCal
Posts: 1,325
Likes: 0
Received 0 Likes
on
0 Posts
How is the rollcage installed? (Was it done right? It's easy not to....)
And "needs fine tuning" could mean "I spent 5 years trying to figure this bitch out!! I WANT IT GONE!" haha...
But most likely the fine tuning won't be a problem...
Needs paint... how badly? If it's horrible all peeled off and looks like crap, I'd say it's worth $4k... if it's just STARTING to peel in some places... like the window corners... I'd say it's worth the $4.5k. It really depends on how much you care about how it looks.
But trust me if paint is the only real problem and you don't have to drop any money (and more importantly, time) into the car, then that's a sweet deal.
Also, it's a race prepped car with 75k miles... expect that engine to be on it's way out in 25k miles. Unless they just liked cruising down the highway for 75k miles with all that horsepower.
Later.
And "needs fine tuning" could mean "I spent 5 years trying to figure this bitch out!! I WANT IT GONE!" haha...
But most likely the fine tuning won't be a problem...
Needs paint... how badly? If it's horrible all peeled off and looks like crap, I'd say it's worth $4k... if it's just STARTING to peel in some places... like the window corners... I'd say it's worth the $4.5k. It really depends on how much you care about how it looks.
But trust me if paint is the only real problem and you don't have to drop any money (and more importantly, time) into the car, then that's a sweet deal.
Also, it's a race prepped car with 75k miles... expect that engine to be on it's way out in 25k miles. Unless they just liked cruising down the highway for 75k miles with all that horsepower.
Later.
Trending Topics
#8
#1 Certified Cone Killer
Join Date: Mar 2002
Location: Battle Creek, MI
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
buy it. It has a different turbo with all of the mods to support it including a re-mapped ECU. The rollcage and seats are usually pricey upgrades and the intercooler and radiator are expensive. This is a deal especially with 105psi on all rotor faces.
#9
Rotary Enthusiast
Join Date: May 2004
Location: SoCal
Posts: 1,325
Likes: 0
Received 0 Likes
on
0 Posts
BTW I know nothing about turbos except that if you do it wrong they suck hardcore and if you do it right they rock hardcore.
Either way, it's hardcore.
Listen to that guy in the last post though, sounds like he knows what he's talking about if he has an S4 TII... poor S4 owners have to deal with every problem that exists.
--Gary
Either way, it's hardcore.
Listen to that guy in the last post though, sounds like he knows what he's talking about if he has an S4 TII... poor S4 owners have to deal with every problem that exists.
--Gary
#14
Senior Member
Thread Starter
Join Date: Jul 2004
Location: kansas
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
i was wondering what do u mean by this "Listen to that guy in the last post though, sounds like he knows what he's talking about if he has an S4 TII... poor S4 owners have to deal with every problem that exists"
=) thank you
=) thank you
#18
i am legendary
I'd totally go for it.
Yah at first I thought 680cc secondaries with 550cc primaries seemed too little for ~400+ hp but then I noticed he has 2 extra 550cc injectors
Yah at first I thought 680cc secondaries with 550cc primaries seemed too little for ~400+ hp but then I noticed he has 2 extra 550cc injectors
#19
Senior Member
Thread Starter
Join Date: Jul 2004
Location: kansas
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
oh hahaha =)
thanks a lot......hope it all goes well and hope i can get the help from all of you.
car now has a little idling up and down as if it got cams...i dont know how i can locate that....hmmm
thanks a lot......hope it all goes well and hope i can get the help from all of you.
car now has a little idling up and down as if it got cams...i dont know how i can locate that....hmmm
#20
i am legendary
Originally Posted by FC_mania
oh hahaha =)
thanks a lot......hope it all goes well and hope i can get the help from all of you.
car now has a little idling up and down as if it got cams...i dont know how i can locate that....hmmm
thanks a lot......hope it all goes well and hope i can get the help from all of you.
car now has a little idling up and down as if it got cams...i dont know how i can locate that....hmmm
#22
Wait................What?
Join Date: Apr 2003
Location: Raleigh/Cary, NC - USA
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
If you don't buy it, I will. I'm currently looking for a modded tii and willing to spend about 4-4.5K
(yes, thats a cheap shot in your thread to get sombody to pm me selling their car as well )
(yes, thats a cheap shot in your thread to get sombody to pm me selling their car as well )
#23
Senior Member
Thread Starter
Join Date: Jul 2004
Location: kansas
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
hahaha i already bought it =) thanks all
a few more things guys...
what range for EGT is considered safe for the motor and what range of fuel pressure is considered good and where is bad?
thx
a few more things guys...
what range for EGT is considered safe for the motor and what range of fuel pressure is considered good and where is bad?
thx
#24
DOWNSTAIRS MIXUP
Join Date: Mar 2003
Location: Lampasas, TX
Posts: 2,723
Likes: 0
Received 0 Likes
on
0 Posts
I envy you man. My brother just pissed me off and found an '88 TII with 32,000 ORIGINAL miles from the ORIGINAL owner for $1800. Apparently it was an older guy that had it, died of a heart attack, and his wife is selling it.