2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

plastic lights under the pop ups...

Thread Tools
 
Search this Thread
 
Old 05-06-03, 08:30 PM
  #26  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 20 Likes on 20 Posts
Originally posted by steve's dog
and there is a path for air, through the lense holes, under the lights, and up to the top of the filter
There is zero improvment on air flow to the intake with the FTP lenses removed (you would have to cut metal for any real help) and a decent increase in aero drag.

You might get a minor improvement of air flow if you took out the rubber gasket behind the headlight, that is mounted to the hood, but the flow through that area would not improve with removing the FTP lens.
Old 05-07-03, 01:26 AM
  #27  
Senior Member

 
petex's Avatar
 
Join Date: Apr 2003
Location: San Francisco, CA
Posts: 329
Likes: 0
Received 0 Likes on 0 Posts
I second that, I spent lots of thought on this and if you remove your FTP lenses you wont gain nothing. Even when the headlight is down and hood gasket is removed, there is some space for air to got towards the intake area, but if you ever saw FC airflow diagram you'll see that there is no pressure.

(I have it but I dont nkow how to post it)
Old 05-07-03, 01:45 AM
  #28  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 20 Likes on 20 Posts
this is what you want to see...


remember the further out the arrows are the lower the pressure, while the further in, the higher the pressure.
Old 05-07-03, 02:29 AM
  #29  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Originally posted by steve's dog
i replaced the stock intake manifold with a cone filter...but i left the "snorkle" thing on to direct air flow...
That won't do anything. That snorkel will only work if it's connected to a sealed airbox so air can be sucked through it. Air will not be pushed into it.
...and there is a path for air, through the lense holes, under the lights, and up to the top of the filter
Go pop you lights and have a good look in there. Then have a look in the area where the airbox was. You'll see there's no way for air to move between these areas as they're completely seperated by a steel bulkhead.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
09-02-15 02:11 PM



Quick Reply: plastic lights under the pop ups...



All times are GMT -5. The time now is 01:40 AM.