pics of my new FC
#26
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Peruvianrx7
how much u buy it for?
how much u buy it for?
------------------------------------------------
okay, adding to this whole mess is the fact that i have a 1986 AND a 1989 rx-7 owner's manual in my glove box...
#27
My cars louder than yours
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by coldfire
okay, adding to this whole mess is the fact that i have a 1986 AND a 1989 rx-7 owner's manual in my glove box...
okay, adding to this whole mess is the fact that i have a 1986 AND a 1989 rx-7 owner's manual in my glove box...
#28
Senior Member
Join Date: Sep 2002
Location: in your mother
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
http://images.cardomain.com/member_i...39_25_full.jpg
And you said it has 120K on the engine...
rebuild, transplant, ???
And you said it has 120K on the engine...
rebuild, transplant, ???
#29
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by genII Drifter
http://images.cardomain.com/member_i...39_25_full.jpg
And you said it has 120K on the engine...
rebuild, transplant, ???
http://images.cardomain.com/member_i...39_25_full.jpg
And you said it has 120K on the engine...
rebuild, transplant, ???
#30
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Roy James
Um..... what... the **** is going on here. Dude, i would try my best to get my change back if i were you, it seems like somethings fishy for sure.
Um..... what... the **** is going on here. Dude, i would try my best to get my change back if i were you, it seems like somethings fishy for sure.
#31
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
err...i was checking today and i think it's got the s5 ECU/wiring harness
looks like there are TWO throttle position sensors...
looks like the BAC cylinder thing is NOT EVEN CONNECTED
*WTF*
looks like there are TWO throttle position sensors...
looks like the BAC cylinder thing is NOT EVEN CONNECTED
*WTF*
#32
Track Junkie
Join Date: Oct 2002
Location: Los Angeles
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
S5 - 333= Coupe w/o auto shoulder belt
S4 - there is no 333...
seems to me that its an N/A S5 with an N/A S4 motor.
S4 - there is no 333...
seems to me that its an N/A S5 with an N/A S4 motor.
Last edited by deltr0n`; 05-09-04 at 08:06 PM.
#34
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Roy James
whats your redline at? the fuel cut. S5s had Two TPS
whats your redline at? the fuel cut. S5s had Two TPS
yeah, i thought that S4s only had ONE tps sensor, but on mine there are TWO...it was weird because in the 86-88 FSM, the TPS wiring pin only has 3 connectors, but i was looking at mine and it has 6...just like in the 89+ FSM...i'll try to get a pic up...
#37
Track Junkie
Join Date: Oct 2002
Location: Los Angeles
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
J = Japan (country where it was manufactured.)
M = Mazda (the manufacturer)
1 = (manufacturing division)
(4th - 8th Character = features/attributes)
FC333 = 2nd Gen. RX-7, S5 N/A, no auto belts
2 = (VIN accuracy check digit)
K = 89 (model year)
0 = (assembly plant)
(12th - 17th Character = the sequence of the vehicle for production as it rolled off the manufacturer's assembly line)
there ya go!
M = Mazda (the manufacturer)
1 = (manufacturing division)
(4th - 8th Character = features/attributes)
FC333 = 2nd Gen. RX-7, S5 N/A, no auto belts
2 = (VIN accuracy check digit)
K = 89 (model year)
0 = (assembly plant)
(12th - 17th Character = the sequence of the vehicle for production as it rolled off the manufacturer's assembly line)
there ya go!
Last edited by deltr0n`; 05-09-04 at 09:24 PM.
#38
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
deltr0n, it's interesting that you bring up that it could be an s5 block...HOW DO I CHECK?
also, i already know all the VIN attributes. the chassis is obviously s5, just everything is mixed with s4 parts...
also, i already know all the VIN attributes. the chassis is obviously s5, just everything is mixed with s4 parts...
#39
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SirCygnus
maybee a meteor hit it and it became a frnakestein rx7 or someshit thats makes it strange. dont sweat it. i would watch out though, they probobly did a visual swap to an s5 to jack up the price.
maybee a meteor hit it and it became a frnakestein rx7 or someshit thats makes it strange. dont sweat it. i would watch out though, they probobly did a visual swap to an s5 to jack up the price.
#40
Lava Surfer
Join Date: Mar 2002
Location: Kailua, HI
Posts: 2,354
Likes: 0
Received 0 Likes
on
0 Posts
you have one serious heck of a Franken-seven there...from what i can see...
S4 tails, seatbelts, shifter, mirrors, engine/radiator.
S5 moldings, bumpers, gauge cluster, interior door panels, chassis.
Interior door panels are gtu ones, but you have factory fogs on the front which were in the gxl's/T2's. You have cruise control (gxl/t2) but no rear wiper (gtu/gtus).
tell everyone its was a prototype S5 that they only released 10 of in early 89 before the true S5's
S4 tails, seatbelts, shifter, mirrors, engine/radiator.
S5 moldings, bumpers, gauge cluster, interior door panels, chassis.
Interior door panels are gtu ones, but you have factory fogs on the front which were in the gxl's/T2's. You have cruise control (gxl/t2) but no rear wiper (gtu/gtus).
tell everyone its was a prototype S5 that they only released 10 of in early 89 before the true S5's
#42
Track Junkie
Join Date: Oct 2002
Location: Los Angeles
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by coldfire
deltr0n, it's interesting that you bring up that it could be an s5 block...HOW DO I CHECK?
deltr0n, it's interesting that you bring up that it could be an s5 block...HOW DO I CHECK?
#43
Well you have a combo of alot of cars there. However, don't worry about it so much! If it runs great, then who the hell cares? Its a great looking car for sure, and I'm sure you'll have lots of fun in it.
-Joe
-Joe
#44
Rotary Enthusiast
couple questions:
1) Which Oil Metering Pump is installed on the engine? Electric or Mechanical? IE: Is there a metal rod hanging off the front of the throttle body?
2) Have you tried grounding the check engine connector located by the battery and checking for ECU codes? It's a green single wire plug. Ground it and turn the ignition on. Does the check engine light flash any codes?
It looks like an S5 car with an S4 engine/tranny swap...the things that have me stumped are the S4 tails, the S4 stereo, and the S4 stereo surround. answer the two above questions and we'll know if you have an S5 ECU!!!
1) Which Oil Metering Pump is installed on the engine? Electric or Mechanical? IE: Is there a metal rod hanging off the front of the throttle body?
2) Have you tried grounding the check engine connector located by the battery and checking for ECU codes? It's a green single wire plug. Ground it and turn the ignition on. Does the check engine light flash any codes?
It looks like an S5 car with an S4 engine/tranny swap...the things that have me stumped are the S4 tails, the S4 stereo, and the S4 stereo surround. answer the two above questions and we'll know if you have an S5 ECU!!!
#46
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by OverDriven
Well you have a combo of alot of cars there. However, don't worry about it so much! If it runs great, then who the hell cares? Its a great looking car for sure, and I'm sure you'll have lots of fun in it.
-Joe
Well you have a combo of alot of cars there. However, don't worry about it so much! If it runs great, then who the hell cares? Its a great looking car for sure, and I'm sure you'll have lots of fun in it.
-Joe
Originally posted by wozzoom
couple questions:
1) Which Oil Metering Pump is installed on the engine? Electric or Mechanical? IE: Is there a metal rod hanging off the front of the throttle body?
2) Have you tried grounding the check engine connector located by the battery and checking for ECU codes? It's a green single wire plug. Ground it and turn the ignition on. Does the check engine light flash any codes?
It looks like an S5 car with an S4 engine/tranny swap...the things that have me stumped are the S4 tails, the S4 stereo, and the S4 stereo surround. answer the two above questions and we'll know if you have an S5 ECU!!!
couple questions:
1) Which Oil Metering Pump is installed on the engine? Electric or Mechanical? IE: Is there a metal rod hanging off the front of the throttle body?
2) Have you tried grounding the check engine connector located by the battery and checking for ECU codes? It's a green single wire plug. Ground it and turn the ignition on. Does the check engine light flash any codes?
It looks like an S5 car with an S4 engine/tranny swap...the things that have me stumped are the S4 tails, the S4 stereo, and the S4 stereo surround. answer the two above questions and we'll know if you have an S5 ECU!!!
about the CEL codes, i need to try that anyway to see what the ECU is saying...
: https://www.rx7club.com/showthread.p...hreadid=304267
sobelik, i WAS planning on selling the rims, but doing so probably wouldn't give me enough cash to buy the 5ZIGENs i want...so i will be holding on to them for a while until i get more $$$
#47
Wish I Was This Cool O.O
Join Date: Feb 2004
Location: Alberta Canada
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
That's in awesome shape =D Looks like a Series 4 to me though, comparing to the '88 I own. Exact same interior, engine bay looks pretty much same, same build.. Who cares though, enjoy it No rust it appears, great looking interior, I say go with the flow man.
#48
ERTW
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: Ottawa, Canada
Posts: 4,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rocky071
That's in awesome shape =D Looks like a Series 4 to me though, comparing to the '88 I own. Exact same interior, engine bay looks pretty much same, same build.. Who cares though, enjoy it No rust it appears, great looking interior, I say go with the flow man.
That's in awesome shape =D Looks like a Series 4 to me though, comparing to the '88 I own. Exact same interior, engine bay looks pretty much same, same build.. Who cares though, enjoy it No rust it appears, great looking interior, I say go with the flow man.
anyways, i am just going to enjoy my car. i worry too much. driving is a simple pleasure, and i am going to just be happy, and put my foot down
#49
Originally posted by coldfire
thanks for the comments. yeah, even though it's an series 5, i have come to the realization that there are more S4 parts on it...
anyways, i am just going to enjoy my car. i worry too much. driving is a simple pleasure, and i am going to just be happy, and put my foot down
thanks for the comments. yeah, even though it's an series 5, i have come to the realization that there are more S4 parts on it...
anyways, i am just going to enjoy my car. i worry too much. driving is a simple pleasure, and i am going to just be happy, and put my foot down
-Joe
#50
rotary rocket
Join Date: Nov 2001
Location: Manhattan kansas
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
you would know if it had an s4 intake on an s5 id sound like an exaust leak in the engine bay and then your car would probally catch fire after being driven hard for just a bit