Pics of my engine
#1
Rotary tuner
Thread Starter
Join Date: Feb 2004
Location: In Sweden
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my engine
Need to show you my engine.
Some info about this engine:
13B-REW block
Streetported
Dowell pinned
Rebalanced
MFR rotor bearing
MFR flywheel and 3 disk tilton clutch
3mm ceramic apex seals
13B-RE upper manifold with custom made lower manifold
All seals springs bearings are new.
On this pics there is a T78 turbo on it but going for a special made to fit this engine setup.
4X640cc injector in lower manifold and 2X1600 cc in el bow.
Im going to use a Swedish made ProSpark fuel and ignition system on it.
Some info about this engine:
13B-REW block
Streetported
Dowell pinned
Rebalanced
MFR rotor bearing
MFR flywheel and 3 disk tilton clutch
3mm ceramic apex seals
13B-RE upper manifold with custom made lower manifold
All seals springs bearings are new.
On this pics there is a T78 turbo on it but going for a special made to fit this engine setup.
4X640cc injector in lower manifold and 2X1600 cc in el bow.
Im going to use a Swedish made ProSpark fuel and ignition system on it.
Trending Topics
#10
B O R I C U A
iTrader: (14)
Originally Posted by wankeltrim
Need to show you my engine.
Some info about this engine:
13B-REW block
Streetported
Dowell pinned
Rebalanced
MFR rotor bearing
MFR flywheel and 3 disk tilton clutch
3mm ceramic apex seals
13B-RE upper manifold with custom made lower manifold
All seals springs bearings are new.
On this pics there is a T78 turbo on it but going for a special made to fit this engine setup.
4X640cc injector in lower manifold and 2X1600 cc in el bow.
Im going to use a Swedish made ProSpark fuel and ignition system on it.
Some info about this engine:
13B-REW block
Streetported
Dowell pinned
Rebalanced
MFR rotor bearing
MFR flywheel and 3 disk tilton clutch
3mm ceramic apex seals
13B-RE upper manifold with custom made lower manifold
All seals springs bearings are new.
On this pics there is a T78 turbo on it but going for a special made to fit this engine setup.
4X640cc injector in lower manifold and 2X1600 cc in el bow.
Im going to use a Swedish made ProSpark fuel and ignition system on it.
Do you more pics? I would love to see the lower intake manifold, and the exhaust manifold.
#21
Rotary tuner
Thread Starter
Join Date: Feb 2004
Location: In Sweden
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I build rotary engines for street and race here in Sweden so i havent paid anything for doing this engine,i have spend around 5000 dollar on parts and all work on this is just for fun.I have some work to do with injector holder and fuel rail holder at lower manifold and make a new ss manifold to my turbo before this engine project is finished.The car im going to put this engine in is a TII -91 that is modify for street and track use.
Some more pics have fun:
Some more pics have fun:
Last edited by wankeltrim; 03-29-05 at 02:26 PM.
#23
I R SAD PANDA W/O BAW
Originally Posted by RX-Heven
Damn, that engine looks almost as good as mine...jk.
Very nice.
Did you make that lim yourself?
Also, what flywheel and clutch is that?
Very nice.
Did you make that lim yourself?
Also, what flywheel and clutch is that?
#25
i am legendary
Originally Posted by wankeltrim
I build rotary engines for street and race here in Sweden so i havent paid anything for doing this engine,i have spend around 5000 dollar on parts and all work on this is just for fun.I have some work to do with injector holder and fuel rail holder at lower manifold and make a new ss manifold to my turbo before this engine project is finished.The car im going to put this engine in is a TII -91 that is modify for street and track use.
Some more pics have fun:
Some more pics have fun: