2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

pegd oil press gauge

Thread Tools
 
Search this Thread
 
Old 08-27-08, 05:58 PM
  #1  
Junior Member
Thread Starter
 
mchabre's Avatar
 
Join Date: Aug 2007
Location: dothan , alabama
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
pegd oil press gauge

ok so few weeks ago i found a broken oil metering line and fixed it , also replaced oil cooling lines . yea no more spots on the ground !!! couple days later noticed oil press higher than used to be . found no issue xcept for a quart low . seemd to resolve the issue for a little while . then it started reading a little higher again . then at idle it would drop way low . seemd to resolve itself . today i noticed the gauge is peggd out even at idle and without the engine running and the key on . any body xpierence this . if the sending unit was bad wouldnt it not read at all ???
Old 08-27-08, 08:46 PM
  #2  
Junior Member
Thread Starter
 
mchabre's Avatar
 
Join Date: Aug 2007
Location: dothan , alabama
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
disregard . a new pressure switch fixed it . gotta love having a parts car !!!!
Old 08-28-08, 11:28 AM
  #3  
FLY NAVY


iTrader: (1)
 
jl1rx7's Avatar
 
Join Date: Aug 2005
Location: Front Royal, VA
Posts: 628
Likes: 0
Received 2 Likes on 2 Posts
Which pressure switch did you replace. I have the same issue.
Old 08-30-08, 02:01 PM
  #4  
Junior Member
Thread Starter
 
mchabre's Avatar
 
Join Date: Aug 2007
Location: dothan , alabama
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
it is next to the oilfilter on the left . looks like a mushroom . the shaft is like a 2 inch 14mm nut . took me 10min to r.n.r
Old 08-30-08, 10:38 PM
  #5  
FLY NAVY


iTrader: (1)
 
jl1rx7's Avatar
 
Join Date: Aug 2005
Location: Front Royal, VA
Posts: 628
Likes: 0
Received 2 Likes on 2 Posts
yep thats the one I replaced and still no joy. I have to chase wires and well I hate that. So I am being lazy.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Snoopy FD
Build Threads
25
12-08-15 01:45 PM
andyvideopro
General Rotary Tech Support
3
08-20-15 10:55 AM



Quick Reply: pegd oil press gauge



All times are GMT -5. The time now is 05:44 PM.