2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

one beep every second

Thread Tools
 
Search this Thread
 
Old 07-15-04, 12:24 PM
  #1  
5one5innovations.com

Thread Starter
 
Oni-kyan's Avatar
 
Join Date: Feb 2004
Location: Toronto Ont.
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
one beep every second

I have been having some trouble with my car and I broke my alt belt last time I went out drifting. I drove the car home(I got pretty hot and had no battery when I got home) the car then sat for about 2weeks. When it was time to fix it and take it out for a spin. I jump started it after replacing the belt and let it idle after about 2 minutes I heard ONE BEEP EVERY SECOND so I turned the car off and restarted it and went for a drive the car was stalling every time I came to a stop I raised the fuel pressure and adjusted the screw on the linkage for the primary butterfly(the one with the white plastic cover on it) Idle problem gone and no beeping. Now the battery wont hold a charge so I will start it and let it idle every once in a while but I find if the car sits idleing the beeping starts after about 2-5 minutes how ever if I start it and drive it even just up and down the block once I can leave the car idleing for aslong as I want and I wont get the beeping. Any help with this would be greatly apresiated.
Thanks in advance for reading my novel and giving me input.

Mael...515
Just incase it will help trouble shoot the problem here is a list of mods that I have done the actuators and the block off I did while the car was off the road for the 2weeks.
mods
no air pump
no 5th and 6th actuators
block off plate over the piece that sits between the 5th-6th ports and is attached to the air pump(it has the 2 electrical conections).
single exaust pipe
gutted cat
cone filter
fuel pressure reg. and gauge
Toms motersport muffler
a/c removed
and I have a exaust leak at the gasket for the cat

What an F ing long novel sorry guys I just wanted to give all the info I could but dam I blaber
Old 07-15-04, 01:11 PM
  #2  
Rotary Enthusiast

 
Adam's Avatar
 
Join Date: Apr 2004
Location: King of the road
Posts: 908
Likes: 0
Received 0 Likes on 0 Posts
Sounds like the computer is giving you a code.
Old 07-15-04, 01:20 PM
  #3  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 20 Likes on 20 Posts
power steering computer... do you have an aftermarket steering wheel or a disconnected speedometer???

And this is covered in the FAQ for FC... please read that before posting!
Old 07-15-04, 01:41 PM
  #4  
5one5innovations.com

Thread Starter
 
Oni-kyan's Avatar
 
Join Date: Feb 2004
Location: Toronto Ont.
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
my bad I will check the faq but yes I have no power steering belt right now so I guess thats the prob thanks so much I though it was somthing like a seal from running so hot that night thanks again
Old 07-15-04, 03:13 PM
  #5  
Rotary Enthusiast

 
rs_1101's Avatar
 
Join Date: May 2004
Location: OC
Posts: 1,088
Likes: 0
Received 0 Likes on 0 Posts
how do you raise fuel pressure? wheres this screw for primary throttle linkage?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blastfastrotary
2nd Generation Specific (1986-1992)
6
09-11-15 12:26 AM
charger-
2nd Generation Specific (1986-1992)
17
01-31-03 05:43 AM
M.C. Language
2nd Generation Specific (1986-1992)
20
12-05-02 04:25 PM
M.C. Language
2nd Generation Specific (1986-1992)
2
05-09-02 12:26 PM
JDuncan
2nd Generation Specific (1986-1992)
9
05-01-02 12:27 AM



Quick Reply: one beep every second



All times are GMT -5. The time now is 09:15 PM.