Ok so I got a Conv., Now what?
#1
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Panama City, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I got a Conv., Now what?
OK, so I got this sweet convertible and will be getting it shipped to my new house in 2 months (short story--it's in Miami and I am moving to Panama City FL soon and it will be brought up by my family).
Anyone out there that owns a convertible can take me under their wing and give me tips on maintaining my ride? Things like enginge maintenance, what's the best wax, etc.......
Thanks!!!!
--Kev
Anyone out there that owns a convertible can take me under their wing and give me tips on maintaining my ride? Things like enginge maintenance, what's the best wax, etc.......
Thanks!!!!
--Kev
#2
I am back
Join Date: Sep 2003
Location: Highland, IL near St. Louis
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
I like the Mothers 3 phase wax system, twice a year. K&N oil filter with Castrol 20w-50 (red cap) every 3k miles. Only hand wash it so the top will not get out of shape, and use a leather & vinyl cleaner/conditioner when the top is wet, rub it in and rinse it off. Also, don't go crazy with tire shine, light coat only if any. In addition, be sure to keep an eye on your oil level. This is just some **** I like to do.
~George
~George
#3
Will Work For Apex Seals
Join Date: Jan 2004
Location: Lower NY
Posts: 1,277
Likes: 0
Received 0 Likes
on
0 Posts
BEFORE TOUCHING THE EXTERIOR, change the spark plugs, change the oil, check the wires, the battery. Check the fuses. Make sure its running right, it would sure suck to dirty it up after you clean it. Get a MAZDA OEM filter, not a K&N. Also, the oil you use is varied upon where you live, I am also a mobile one fan, no synthetics though. As said above, make sure to check your oil level every week too. Let me repeat that for possible penetration, check your oil level ever week.
Last edited by Aesop Rock; 12-31-04 at 06:13 PM.
#4
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Panama City, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
OK, good stuff so far.
What about gas? What Octane should be used? I will be driving this car primarily in the Panhandle of FL (Panama City FL). It already has a K&N air Filter.
What about gas? What Octane should be used? I will be driving this car primarily in the Panhandle of FL (Panama City FL). It already has a K&N air Filter.
#6
Full Member
Join Date: Jun 2004
Location: NYC
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Ok. as a proud RXvert owner myself first thing do all of the engine fluid checks as mentioned above, next check the top for leaks and fix asap. The top tends to leak towards the front top corners of the windows and the bottom of the back windows. Keep the top conditioned because they tear easily at the bottom tension points when the top is down. This is very important if you want to keep your Seven rust free and interior in top shape. Also if you already have leaks, pull off the rubber drainer plugs so that water doesnt collect there. They are in the rear where the jack is stored and behind the seats where the compartment section is located in Coupe models.
One of the first mods you should consider is swapping that weak 70 amp alt. for a 90 amp which can be usually found at a alternator/starter shop in stock. Another thing if you are going towards the performance direction in mods, keep those very light stock BBS rims because they are the perfect rims for these cars, considering that the car weighs about 3,400lbs with full trim. Good luck and keep us posted
One of the first mods you should consider is swapping that weak 70 amp alt. for a 90 amp which can be usually found at a alternator/starter shop in stock. Another thing if you are going towards the performance direction in mods, keep those very light stock BBS rims because they are the perfect rims for these cars, considering that the car weighs about 3,400lbs with full trim. Good luck and keep us posted
#7
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Panama City, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Cool....good info so far!!
I was recently in Miami and took it to an Rx7 mechanic and he gave it a once over and said it was in great shape but I personally will be having the clutch changed because it is so damn hard (not a stock clutch). Just some minor asthetic things have to be fixed (like the plastic around the radio is cracked, the seats had to be stiched and will most likely get seat covers. The speakers in the head rests don't work now (not connected I think). I will definitely look into that alternator. What is the benefit in getting a 90 amp alt? I am not engine smart.
Do you recommend any good products to maintain the top? The top I have is a new one and in great shape with no leaks. I want to keep it that way.
Oh and Chinooo, I noticed you have a hood scoop. Any purpose to it? If you have a n/a engine, does it do anything like bring cool air into th engine bay or something? Just curious.
Happy New Year!!!
I was recently in Miami and took it to an Rx7 mechanic and he gave it a once over and said it was in great shape but I personally will be having the clutch changed because it is so damn hard (not a stock clutch). Just some minor asthetic things have to be fixed (like the plastic around the radio is cracked, the seats had to be stiched and will most likely get seat covers. The speakers in the head rests don't work now (not connected I think). I will definitely look into that alternator. What is the benefit in getting a 90 amp alt? I am not engine smart.
Do you recommend any good products to maintain the top? The top I have is a new one and in great shape with no leaks. I want to keep it that way.
Oh and Chinooo, I noticed you have a hood scoop. Any purpose to it? If you have a n/a engine, does it do anything like bring cool air into th engine bay or something? Just curious.
Happy New Year!!!
Trending Topics
#8
Full Member
Join Date: Jun 2004
Location: NYC
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Maguire's has an excellent top and leather conditioner that is a two step process. Just go to any local Autozone or big name autopart store. They should have it. And as for the TurboII hood that's on the car, let me list all the benefits of having one. #1 weight reduction they weigh much lighter than the steel hoods because they are aluminum. #2 as you guessed most of the heat in the engine bay naturally collects towards the middle so the opening serves like a chimney. You want to keep the engine bay on a rotary as cool as you can get it because rotaries produce alot of heat (as you may know already) and heat is a very big enemy as far as having long engine life. Constant cool air will make your engine last and the car performs better especially if you have an aftermarket intake or do alot of top end runs. On a hot 90 degree day the hottest my temperature gauge has marked was to the halfway point and this is with the A/C full blast. #3 Isn' t this hood the best body upgrade on an FC? This hood scares the crap out of Honda people! Anyway alot has been done to my Vert since these pictures. Hopefully I can get the new pictures in this week.
#9
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally Posted by Kevinsino
Things like enginge maintenance
Originally Posted by Geoman84
87 octane on a N/A, 93 on a turbo
Originally Posted by CHINOOO
#2 as you guessed most of the heat in the engine bay naturally collects towards the middle so the opening serves like a chimney.
Originally Posted by CHINOOO
You want to keep the engine bay on a rotary as cool as you can get it because rotaries produce alot of heat (as you may know already) and heat is a very big enemy as far as having long engine life. Constant cool air will make your engine last and the car performs better especially if you have an aftermarket intake or do alot of top end runs.
Originally Posted by CHINOOO
This hood scares the crap out of Honda people!
#10
Full Member
Join Date: Oct 2003
Location: Sacramento
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Also, check the drain pockets on the outside of the vert top just in case. I've found mine to plug up occasionally due to the number of trees in the area. Dirt, leaves, and the like get caught in there. But if you have a garage...all the better. One more thing, IF you find yourself needing some good seals for the vert such as doors, top, windows ect, a great place to get them from is www.VictoriaBritish.com. Just passing along a good tip that was left to me. Good luck.
Last edited by RXONMYMIND; 01-02-05 at 10:35 PM. Reason: good tips.
#11
putting it down daily
All great stuff, guys.
I put a 3rd gen alternator & optima red top to get rid of the weak charging system inherent with these cars- and after performing a 60k tune up, fluid change, etc, I found myself going with ann open air element (Bonez) and downpipe with presilencer. I chose to retain the air pump for aux ports, and because with the top down, my wife thinks the exhaust smells bad enough & I didn't want to make it worse.
I put a 3rd gen alternator & optima red top to get rid of the weak charging system inherent with these cars- and after performing a 60k tune up, fluid change, etc, I found myself going with ann open air element (Bonez) and downpipe with presilencer. I chose to retain the air pump for aux ports, and because with the top down, my wife thinks the exhaust smells bad enough & I didn't want to make it worse.
#12
I am back
Join Date: Sep 2003
Location: Highland, IL near St. Louis
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CHINOOO
#1 weight reduction they weigh much lighter than the steel hoods because they are aluminum.
#14
Dyslexia gotta love it
Join Date: Aug 2004
Location: Geneseo IL usa
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
yes always rember to watch out for rust because we all dont have access to that navy jelly that kills rust (coupple of older much older friends have had experince with the stuff and they live by it its what they use on the hulls of ships that start to rust) wish i had some of it but ithink i'll just hold out untill i can get my self a FD or a TII
#15
yeah I used to live in Panama City for 6 months during spring break in 96 with MTV and all the chicks in the world. Do yourself a favor and don't worry about making that car fast. Get a nice body kit and a new paint job with some rims. And get ready for crusing Magic Strip. The vert will serve you well.
#16
Full Member
Join Date: Jun 2004
Location: NYC
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Convertible weight.
Originally Posted by NZConvertible
Hell no. My factory S4 turbo 'vert only weighs ~3000lb; US non-turbo 'verts weigh even less.
#17
Full Member
Join Date: Jun 2004
Location: NYC
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Vert N/A hood
Originally Posted by Geoman84
Verts have n/a hoods made of aluminum stock.
Last edited by CHINOOO; 01-03-05 at 08:58 AM.
#18
Originally Posted by CHINOOO
No. Well as far as an 88 Convertible, the sticker on the door has the car just below 3,400 in the U.S. I wish I was wrong though
Gross Vehicle Weight = 88 vert at 3003 + 397 pounds of passengers and luggage?
#20
who cares about weight. You can't go over 3 mph on Magic strip. Panama City is all about getting the chicks. Just wait and you will see when Feb-March rolls around. By Labor day in Sept. you will have your hands full with women who pay some scam artist travel agent who has booked 3 different people to the same room (first to show and pay gets it) and you will have all these chicks with no place to stay. Trust me they have a attitude adjustment when they have slept in their car for 2 nights straight.
#21
Junior Member
Thread Starter
Join Date: Sep 2004
Location: Panama City, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Bukwild,
My car already has sweet 18" rims and a nice paint job with a sweet top. I just want to keep it in great shape as long as possible. It will be my weekend car to take to work on Friday's and around town on the weekends. (My everyday car is a '00 Civic).
P. City is cool, I'll be there working at Tyndall AFB, so its gonna be cool when I drive in my flight suit and some ladies are next to me at a stop sign.......
I am curious about the Turbo Hood, it might be something I might want to get. I like the way it looks. Any idea how much it will cost?
My car already has sweet 18" rims and a nice paint job with a sweet top. I just want to keep it in great shape as long as possible. It will be my weekend car to take to work on Friday's and around town on the weekends. (My everyday car is a '00 Civic).
P. City is cool, I'll be there working at Tyndall AFB, so its gonna be cool when I drive in my flight suit and some ladies are next to me at a stop sign.......
I am curious about the Turbo Hood, it might be something I might want to get. I like the way it looks. Any idea how much it will cost?
#22
I am back
Join Date: Sep 2003
Location: Highland, IL near St. Louis
Posts: 829
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kevinsino
I am curious about the Turbo Hood, it might be something I might want to get. I like the way it looks. Any idea how much it will cost?
#23
Sweet, I plan on making it back down to PC this summer. I will be scooping them up at LA VELA. When you get their you will know what I am talking about. Also there used to be a mexican resturant on the strip that had a drive thru. They used to sell $1 margaritas and we used to get about 20 of them and hit the strip. Ladies would jump in my jeep and have a drink or 3. I guess things never change.