2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

OEM Fuel Injectors & Pulsation Dampers

Thread Tools
 
Search this Thread
 
Old 01-08-05, 02:07 PM
  #1  
Senior Member

Thread Starter
 
theone81's Avatar
 
Join Date: Mar 2003
Location: Ca
Posts: 463
Likes: 0
Received 0 Likes on 0 Posts
OEM Fuel Injectors & Pulsation Dampers

I called Mazda and they are ofering me 4 injectors isn't he supposed to sell me 2 i primary and secondary injectors? also are AFTERMARKET Injectors recommened or OEM? Also "Pulsation Damper" do those come AFTERMARKET too as well? with the Rail? the injectors pair of 4 are $263.90 and the Pulsation Damper W/rail for $252.90 .. the reason im asking is that my TII is not starting at all. its got a new Battery 7months old, and the Battery cables aren't correded, but i do get a heavy smell of gasoline from the engine bay, so i figure its my damper or the injectors.
Old 01-08-05, 02:20 PM
  #2  
Zoom Zoom Boom!

 
Dan H's Avatar
 
Join Date: Mar 2003
Location: San Francisco, CA
Posts: 2,312
Likes: 0
Received 0 Likes on 0 Posts
Primaries and secondaries are exactly the same injectors.

Yes, there are aftermarket pulsation dampers available that can be fitted. You can get your model S5 TII PD's with rails at mazdatrix for only $210.

Why not test the injectors? I doubt all 4 failed.
Old 01-08-05, 02:43 PM
  #3  
Senior Member

Thread Starter
 
theone81's Avatar
 
Join Date: Mar 2003
Location: Ca
Posts: 463
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dan H
Primaries and secondaries are exactly the same injectors.

Yes, there are aftermarket pulsation dampers available that can be fitted. You can get your model S5 TII PD's with rails at mazdatrix for only $210.

Why not test the injectors? I doubt all 4 failed.
how do you test them, do you kinda relate my issue with the car?
Old 01-08-05, 04:06 PM
  #4  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Injectors rarely need replacing, so don't waste your money. Have them serviced instead and they'll be like new.
Old 01-08-05, 04:10 PM
  #5  
Moderator

iTrader: (3)
 
diabolical1's Avatar
 
Join Date: Feb 2002
Location: FL
Posts: 10,867
Received 313 Likes on 274 Posts
also check to make sure that all joints in the fuel line are tight ...
Old 01-08-05, 07:49 PM
  #6  
Senior Member

Thread Starter
 
theone81's Avatar
 
Join Date: Mar 2003
Location: Ca
Posts: 463
Likes: 0
Received 0 Likes on 0 Posts
where do you service them im getting rebuilds for like 55 bucks each
Old 01-08-05, 07:54 PM
  #7  
i'm disrespectful to dirt

 
MrSparkle's Avatar
 
Join Date: Mar 2004
Location: soul cal, ca
Posts: 476
Likes: 0
Received 2 Likes on 2 Posts
i found a place in fontana a while ago, but i can't remember where. a lot of people have good experiences with rc engineering in torance...

http://www.rceng.com/
Old 01-08-05, 08:02 PM
  #8  
s4 for life

 
13bpower's Avatar
 
Join Date: May 2002
Location: Oahu
Posts: 2,516
Likes: 0
Received 1 Like on 1 Post
Rebuilding injectors will be 22-25 each. I have had it done at a injector shop buy my house. Mazda injectors rarely die, unlike very weak Nissan injectors that FLAT OUT DIE and you have to spend $700 on six new ones becuase the other 5 are about to die! Damn cheap *** 300zx injectors.... still pissed about that. *rant over*

The PD.... I wouldn't waset my money on a new one. I did that once already and it failed in less than a year, yes a bran new one form mazdatrix. *new rant* SO F'n mad about that. I just banjo bolted it after that and everything has been golden.
Old 01-08-05, 09:37 PM
  #9  
Full Member

 
switch's Avatar
 
Join Date: Oct 2004
Location: Bothell, WA
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
We service them for $12 each and offer a one day turn.



Gordon
WitchHunter Performance
Old 01-09-05, 12:37 AM
  #10  
Locust of the apocalypse

 
YearsOfDecay's Avatar
 
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like on 1 Post
12 bux each is a hell of good price.... you give a bench flow sheet with that like i got from Marren??

Anyway.... The spec sheet on my injectors came back with the primaries flowing at 33% capacity on the one and 45% on the other on initial bench tests and 100% for both after........ they weren't dead... just neaded serviced after 15 years of use!!!!!
Old 01-09-05, 01:38 AM
  #11  
Lives on the Forum

 
RETed's Avatar
 
Join Date: Feb 2001
Location: n
Posts: 26,664
Likes: 0
Received 17 Likes on 16 Posts
You need to do more troubleshooting.
It's not the fuel injectors or pulsation damper that's causing your problems.


-Ted
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
sYnth.
Build Threads
0
08-19-15 06:27 PM



Quick Reply: OEM Fuel Injectors & Pulsation Dampers



All times are GMT -5. The time now is 06:37 AM.