OBV removal
#26
In Full Autist Cosplay
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Attached my cavalier to the pole, broke the breaker bar.
im not a fan of using a torch in the engine bay.. ill probably use one of our impact guns at work..
the ones we have are used for unbolting wheel nuts on tractors and trailers.. you only need 450-500 ft/lbs on them, but those guns can put way more on it
ok so lemme get this straight
heres the bolt
C/-----
(sorry for the lack of ansi characters )
use some RTV at the "/" and threadlock (a medium locker or a super locker?) at the "------"
#27
Full Member
Join Date: Jun 2002
Location: Chicago North suburbs
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Terrh
and if that doesn't work, use fire.
I tried the starter method and nothing happened, aside from me burning a wire to the starter.
So, I put a 6 ft pole on the breaker bar and went at it that way. No luck. Attached my cavalier to the pole, broke the breaker bar.
Gave up, used a torch, it came right off.
Really, a torch is the way to go.
and if that doesn't work, use fire.
I tried the starter method and nothing happened, aside from me burning a wire to the starter.
So, I put a 6 ft pole on the breaker bar and went at it that way. No luck. Attached my cavalier to the pole, broke the breaker bar.
Gave up, used a torch, it came right off.
Really, a torch is the way to go.
I tryed the tourch. No luck so far. The bolt will not move. I try the starter method....broke the breaker bar (craftsman).
How long did you cook the bolt. I try for 2-3 min. Should I go longer?
#29
I went at it for like... I dunno.. 30-45 sec, tops.
You're not using a propane torch, are you?
they don't get very hot... If you have to use one of those, surround the bolt with as much flame as possible, then as soon as you are done heating it grab the breaker bar and YANK on it and it should come off... it still won't be easy, but it will be MUCH MUCH easier.
You're not using a propane torch, are you?
they don't get very hot... If you have to use one of those, surround the bolt with as much flame as possible, then as soon as you are done heating it grab the breaker bar and YANK on it and it should come off... it still won't be easy, but it will be MUCH MUCH easier.
#30
Full Member
Join Date: Jun 2002
Location: Chicago North suburbs
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
yeah.....I only have a propane torch. I will give your idea a try, right after I go back the sears to get my free replacement for my breaker bar. Got to love that lifetime warranty.
#31
I went at it for like... I dunno.. 30-45 sec, tops.
You're not using a propane torch, are you?
they don't get very hot... If you have to use one of those, surround the bolt with as much flame as possible, then as soon as you are done heating it grab the breaker bar and YANK on it and it should come off... it still won't be easy, but it will be MUCH MUCH easier.
You're not using a propane torch, are you?
they don't get very hot... If you have to use one of those, surround the bolt with as much flame as possible, then as soon as you are done heating it grab the breaker bar and YANK on it and it should come off... it still won't be easy, but it will be MUCH MUCH easier.
#32
In Full Autist Cosplay
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
yeah you gotta use a real torch..
if you can, get your hands on impact air tools..
(i know i still havent got the pellet in so i cant say it works the best)
but at work we do alot of major engine repairs on turbo diesel trucks, anything we cant get off with a breaker bar, we use an impact gun. if the gun doesnt work, we use a torch then the gun.
as a last resort (i wouldnt recommend this because our shop is a rich rich shop ) we weld a large steel bar to the bolt we are trying to remove and that will get it off.
(obviously afterwards we just buy a new bolt.. but welding it to a bar has only happened once or twice..)
if you can, get your hands on impact air tools..
(i know i still havent got the pellet in so i cant say it works the best)
but at work we do alot of major engine repairs on turbo diesel trucks, anything we cant get off with a breaker bar, we use an impact gun. if the gun doesnt work, we use a torch then the gun.
as a last resort (i wouldnt recommend this because our shop is a rich rich shop ) we weld a large steel bar to the bolt we are trying to remove and that will get it off.
(obviously afterwards we just buy a new bolt.. but welding it to a bar has only happened once or twice..)
#33
In Full Autist Cosplay
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
bump
is this completely safe?
im still worried about the torrington bearing. after reading tutorials from FC3S and Mazdatrix, im a little more nervous.
they insruct to hold the clutch pedal down, but HOW can you loosen the bolt while the clutch is down? the engine turns over! i tried holding the alternator pulley bolt, and the belt slips and the main pulley still turns. i tried all sorts of things.
the only thing i could conclude is to leave it in 1st gear, and that will keep it from turning over while trying to remove the bolt
but to do this the clutch must be OUT, not in (obviously). FC3S and Mazdatrix clearly stated that before you even loosen the bolt at all to have the clutch held in..
anyone?!?!
Originally posted by Icemark in thread "Oil Pressure Question"
Looking at the pictures you can see the one with the breaker bar... I rest the breaker bar against the cars frame rail, right above the air condition lines you can see in the picture. Then I crank the car for like only a second. Just enough to turn it over, but not even come close to starting. The cranking will break the bolt loose real easy, so you don't need air tools or anything.
Looking at the pictures you can see the one with the breaker bar... I rest the breaker bar against the cars frame rail, right above the air condition lines you can see in the picture. Then I crank the car for like only a second. Just enough to turn it over, but not even come close to starting. The cranking will break the bolt loose real easy, so you don't need air tools or anything.
im still worried about the torrington bearing. after reading tutorials from FC3S and Mazdatrix, im a little more nervous.
they insruct to hold the clutch pedal down, but HOW can you loosen the bolt while the clutch is down? the engine turns over! i tried holding the alternator pulley bolt, and the belt slips and the main pulley still turns. i tried all sorts of things.
the only thing i could conclude is to leave it in 1st gear, and that will keep it from turning over while trying to remove the bolt
but to do this the clutch must be OUT, not in (obviously). FC3S and Mazdatrix clearly stated that before you even loosen the bolt at all to have the clutch held in..
anyone?!?!
#35
In Full Autist Cosplay
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
thats what i mean though - is that a completely safe thing to do?
from what i read the clutch should be in during the whole procedure..
just wanted to double check..
from what i read the clutch should be in during the whole procedure..
just wanted to double check..
#37
In Full Autist Cosplay
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking the same thing, but it doesnt hurt to double check.. i was going to do that, but i decided against it - just didnt feel comfortable without posting in the forum and getting some responses first.
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM