o2 sensor prob.. need help!!!
08-04-06, 08:51 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: N.J.
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
o2 sensor prob.. need help!!!
I got a prob. seems that ive mixed up the wires for my o2 sensor. The plug has been cut off so its ran direct...because of this I cant find the right wire to bind it with!!!!!!! IM smoking and running RICH!!!!!!!
"""""""""""can anyone please take a pick of their wiring harness with the wire that plugs into the o2 sensor"""''"""""I need to see which color is the wire that I should bind the o2 sensor with.
my ride: 1988 mazda rx7 turbo 2
"""""""""""can anyone please take a pick of their wiring harness with the wire that plugs into the o2 sensor"""''"""""I need to see which color is the wire that I should bind the o2 sensor with.
my ride: 1988 mazda rx7 turbo 2
08-04-06, 09:00 AM
#2
Senior Member
Join Date: Aug 2005
Location: Midwest
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
I have a 90 TII and my o2 sensor wire came out right by the BAC valve on the intake manifold. the wire is grey. It is shielded, and the inner wire is Black. Make sure you strip off about 2 inches of the grey insulation, and cut off all the exposed shielding before you strip the inner black wire. You dont want to have ANY of the shielding in your connection.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM