2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

No Start?? My DD

Thread Tools
 
Search this Thread
 
Old 01-03-11, 09:18 PM
  #1  
Full Member

Thread Starter
 
89FC Alpino White's Avatar
 
Join Date: Jun 2009
Location: Minnesota
Posts: 133
Likes: 0
Received 0 Likes on 0 Posts
Unhappy No Start?? My DD

So i posted this problem a couple weeks back. I have an 87 TII, my DD. One day i went to start her and i got absolutely nothing. Turning the key to acc, on, or start does nothing at all. My stereo, blinkers, etc. do not work or come on. Thus something must not be getting power or my switch is bad.

I have checked everything from my battery terminals, to voltage on wires going to my ignition switch. Which the solid black wire gets constant voltage but nothing else does with the key to "acc" "on" "start" nothing changes only power at the black wire. So i got a used ignition switch out it in. Still nothing. All fuses are good, all wiring appears to be good. The weird thing is one day it just started randomly when i went to turn the key. Then the next time i went to start it nothing again, and nothing since.

Any help will be much appreciated guys.
Old 01-04-11, 03:08 PM
  #2  
Trunk Ornament

iTrader: (11)
 
AGreen's Avatar
 
Join Date: Sep 2006
Location: Goose Creek, SC
Posts: 3,054
Likes: 0
Received 2 Likes on 2 Posts
Easy. You got a bum used ignition switch.
Old 01-06-11, 09:56 PM
  #3  
Full Member

Thread Starter
 
89FC Alpino White's Avatar
 
Join Date: Jun 2009
Location: Minnesota
Posts: 133
Likes: 0
Received 0 Likes on 0 Posts
you really think so? it started randomly with the original one, then never again and then with a used one in i still get nothing??
Old 01-07-11, 08:50 AM
  #4  
Trunk Ornament

iTrader: (11)
 
AGreen's Avatar
 
Join Date: Sep 2006
Location: Goose Creek, SC
Posts: 3,054
Likes: 0
Received 2 Likes on 2 Posts
Yep. If you've installed the ignition switch properly, and you're testing properly, then the only explanation as to why you're getting power to the black wire and nothing to the other wires is the ignition switch.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
ZacMan
Build Threads
4
09-19-15 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
whinin
New Member RX-7 Technical
10
09-05-15 11:52 PM



Quick Reply: No Start?? My DD



All times are GMT -5. The time now is 03:20 PM.