No juice at two injectors
10-25-05, 11:49 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: San pedro Ca
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
No juice at two injectors
Yea,
My pal checked the injectors for juice and there was no power at two of the injectors. I have an 80 amp fuse that is jumped with solder by a tweecker guy before I owned it. I guess that could have burned something else out but what? Any helpfull hints would be greatly appreciated.
Thank you and thank God for this tech help, Johnny Mac.
My pal checked the injectors for juice and there was no power at two of the injectors. I have an 80 amp fuse that is jumped with solder by a tweecker guy before I owned it. I guess that could have burned something else out but what? Any helpfull hints would be greatly appreciated.
Thank you and thank God for this tech help, Johnny Mac.
10-26-05, 01:20 AM
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Firstly, replace that 80A fuse before the car burns to the ground. There's probably a reason why a fuse isn't in there, and that needs to be fixed before you do some damage.
The four injectors are all fed power from the same place, so the only way only two could have power is broken wires, which isn't very likely. How are you checking this? With the DMM black lead grounded and the ignition, on the black/white wire at each injector should show 12V.
The four injectors are all fed power from the same place, so the only way only two could have power is broken wires, which isn't very likely. How are you checking this? With the DMM black lead grounded and the ignition, on the black/white wire at each injector should show 12V.
