next modification?
#1
next modification?
okay.. so far enginewise I've done:
intake (cone + TID)
SAFC
3"DP - 2.5" duals
emmissions removal
8.8mm wires, NGK plugs
umm, I guess that's it
wtf else can I do for more power? it's quick, but I still want more.
this thread is for ENGINE/power modifications ONLY. The suspension side of things will be handled next spring. (no point lowering the car for winter!) and cannot be handled at this time.
intake (cone + TID)
SAFC
3"DP - 2.5" duals
emmissions removal
8.8mm wires, NGK plugs
umm, I guess that's it
wtf else can I do for more power? it's quick, but I still want more.
this thread is for ENGINE/power modifications ONLY. The suspension side of things will be handled next spring. (no point lowering the car for winter!) and cannot be handled at this time.
#2
i am legendary
I'd get some more fuel before you go any further. Walbro pump and some bigger secondaries or something. Oh and an FCD
After those get a boost controller and crank up the boost
After those get a boost controller and crank up the boost
Last edited by ddub; 07-15-04 at 08:35 PM.
#3
i am legendary
Or you can just follow this outline, if I had a TII I definitely would
http://fc3spro.com/TECH/FM2W/power.htm
http://fc3spro.com/TECH/FM2W/power.htm
#5
It's a Hammer
Join Date: Jul 2002
Location: Richland WA
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Get a Rtek7 and sell the FCD on Ebay.
Walbro 255 with a fuel pump rewire.
720 secondaries
Main Cat replacement
Port wastegate
Walbro 255 with a fuel pump rewire.
720 secondaries
Main Cat replacement
Port wastegate
Last edited by dr.jones63; 07-16-04 at 07:23 AM.
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM