New wheels are ON
#1
New wheels are ON
The caps wound't fit over the hub, but I want to polish the hub to match the lip. Not sure what i wanna do with the rear. On the ground you can see my old 255/40/17's... Way too heavy for an n/a. I can light these up and get them sliding much easier then those OZ rims. I know alot of people wanted to see these actually ON the car so here they are.
I'm gonna replace the wheel locks with normal studs for the look. Those old rims were about 3grand with tires so I wanted to make sure they didn't get "Lost" but now it's form over function in that respect.
They are rota slipstreams btw.
Close ups of the rims can be seen here: http://66.92.46.18/defekt/wheels/
-Mike
I'm gonna replace the wheel locks with normal studs for the look. Those old rims were about 3grand with tires so I wanted to make sure they didn't get "Lost" but now it's form over function in that respect.
They are rota slipstreams btw.
Close ups of the rims can be seen here: http://66.92.46.18/defekt/wheels/
-Mike
Trending Topics
#8
Black13b, I think you're the only one
Those are 16's but the different colors make the wheels look smaller then they really are.
500 bucks shipped from www.machiii.net
Those are 16's but the different colors make the wheels look smaller then they really are.
500 bucks shipped from www.machiii.net
#12
All other pictures of my car can be found at www.cochran-racing.com
Mods are as follows
Cranecams hi-6 ignition
Flex-a-lite black magic fan
ACT HD Pressureplate and mazdatrix SS clutch.
Rota Slipstreams 16x7 +40mm
Kumho Ecstsa 712 225/50/16
DAD Racing Seats
Complete s5 interior swap
1fast t2 Guage panel
Autometer phantom gauges
Corksport gauge faces
Bonez intake
Mazdatrix SS braided brake lines
Bonez stage 1 brake pads
RB head, Presilencer
Apex'i N1 exhaust
Removed P/S, A/C All emissions.
5th/6th port sleeves Locktited open with PR sleeves (properly installed)
Not sure if it's ever been rebuilt.
Mazdatrix competition engine and transmission mounts
Intrax Lowering springs and Tokico blue's
Mazdatrix Shortshifter
Redlinegoods.com shift boots
Momo shifter (Mazdaspeed replica)
ebay strut bar
Kenwood Excelon 815 headunit
Kenwood excelon 800watt amp
Infinity perfect 10.1 inch sub in custom enclosure (cargo straps holding it down)
Infinity Kappa 6.5 in the towers with custom speaker rings (cut from 1/2inch MDF and painted black)
4ohm Kicker tweeters in door vents (rotor shaped tweeters )
Viper alarm.
I think that's everything....
i can't remember.
Mods to come:
RB sways,
RB front strut bar
Cusco 4pt roll bar
Rebuild, FD seals, S5 rotors monster street port.
Torsen LSD w/ 4.3 gear
Miata gearbox (maybe...)
Mods are as follows
Cranecams hi-6 ignition
Flex-a-lite black magic fan
ACT HD Pressureplate and mazdatrix SS clutch.
Rota Slipstreams 16x7 +40mm
Kumho Ecstsa 712 225/50/16
DAD Racing Seats
Complete s5 interior swap
1fast t2 Guage panel
Autometer phantom gauges
Corksport gauge faces
Bonez intake
Mazdatrix SS braided brake lines
Bonez stage 1 brake pads
RB head, Presilencer
Apex'i N1 exhaust
Removed P/S, A/C All emissions.
5th/6th port sleeves Locktited open with PR sleeves (properly installed)
Not sure if it's ever been rebuilt.
Mazdatrix competition engine and transmission mounts
Intrax Lowering springs and Tokico blue's
Mazdatrix Shortshifter
Redlinegoods.com shift boots
Momo shifter (Mazdaspeed replica)
ebay strut bar
Kenwood Excelon 815 headunit
Kenwood excelon 800watt amp
Infinity perfect 10.1 inch sub in custom enclosure (cargo straps holding it down)
Infinity Kappa 6.5 in the towers with custom speaker rings (cut from 1/2inch MDF and painted black)
4ohm Kicker tweeters in door vents (rotor shaped tweeters )
Viper alarm.
I think that's everything....
i can't remember.
Mods to come:
RB sways,
RB front strut bar
Cusco 4pt roll bar
Rebuild, FD seals, S5 rotors monster street port.
Torsen LSD w/ 4.3 gear
Miata gearbox (maybe...)
Last edited by F1blueRx7; 10-19-03 at 07:25 PM.
#13
seven-less
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
have i told you already? your car is ****** hot!
btw: i got those seats. were they as much as a bitch to customize the brackets for you as it was for me? or did you say they just fit right in?
argh!!
btw: i got those seats. were they as much as a bitch to customize the brackets for you as it was for me? or did you say they just fit right in?
argh!!
#18
Haven't we ALL heard this
That is a nice color for a FC.
And for those of us with a slow *** modem who do not want to see a graveyard, anouther car, house, parking lot, boat,church, trees and a hammer. Use this image
James
And for those of us with a slow *** modem who do not want to see a graveyard, anouther car, house, parking lot, boat,church, trees and a hammer. Use this image
James
#19
Originally posted by Wankel7
That is a nice color for a FC.
And for those of us with a slow *** modem who do not want to see a graveyard, anouther car, house, parking lot, boat,church, trees and a hammer. Use this image
James
That is a nice color for a FC.
And for those of us with a slow *** modem who do not want to see a graveyard, anouther car, house, parking lot, boat,church, trees and a hammer. Use this image
James
#22
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rotaryracer1
those are ugly and very small 15's geez. the other wheels on the ground look a ton better.
those are ugly and very small 15's geez. the other wheels on the ground look a ton better.
And the ones on the ground weigh alot more than the Rota's.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM