new turbo for my 10th.need help!
09-12-03, 08:12 PM
#1
parts for sale
Thread Starter
Join Date: Feb 2002
Location: Johnson city Tenn
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
new turbo for my 10th.need help!
o.k.here is the deal.I just got my new hks t04 turbo,hks wast gate and hks fmi.here comes the problem.now My 10th already has greedy exhaust,hks fuel defender,electic fan,walbro fuel pump street ported engine with alum flywheel.I also have a apexi afc old style.I've been looking for 720 injectors for sometime with no luck.the only thing I've come across was a set of 4 new 720's but they are for a talon of mitz.They are top feed low imp.will these work?and if anyone has any idea about the fuel rail that would be very helpful.any ideas anyone has would be great let me know if you have this same setup.with some pics.Thanks
09-13-03, 01:47 AM
#2
Lives on the Forum
They will fit, BUT, you'll need to change the fuel injector plugs and insert 20W 10-ohm resistors in line for all 4 injectors.  The fuel injectors themselves are physically the same dimensions.
You've basically got two choices - get the GReddy 720's and do the above or get your stock fuel injectors drilled out by RC Engineering or equivalent.
-Ted
You've basically got two choices - get the GReddy 720's and do the above or get your stock fuel injectors drilled out by RC Engineering or equivalent.
-Ted
09-13-03, 05:06 AM
#3
Sick & Twisted
Join Date: Dec 2001
Location: FT Lauderdale, Fl
Posts: 1,993
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RETed
They will fit, BUT, you'll need to change the fuel injector plugs and insert 20W 10-ohm resistors in line for all 4 injectors.  The fuel injectors themselves are physically the same dimensions.
You've basically got two choices - get the GReddy 720's and do the above or get your stock fuel injectors drilled out by RC Engineering or equivalent.
-Ted
They will fit, BUT, you'll need to change the fuel injector plugs and insert 20W 10-ohm resistors in line for all 4 injectors.  The fuel injectors themselves are physically the same dimensions.
You've basically got two choices - get the GReddy 720's and do the above or get your stock fuel injectors drilled out by RC Engineering or equivalent.
-Ted
09-13-03, 10:59 AM
#4
Rotary Freak
Join Date: Aug 2001
Location: Ottawa, Ontario
Posts: 2,788
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dvls-7
Actually RC does not drill out top feep inject. Thats what they told me when i called them. They can do the side feed ones. It did sound kind of strange but it is their line of work and they should know what they are doing.
Actually RC does not drill out top feep inject. Thats what they told me when i called them. They can do the side feed ones. It did sound kind of strange but it is their line of work and they should know what they are doing.
09-13-03, 09:19 PM
#5
parts for sale
Thread Starter
Join Date: Feb 2002
Location: Johnson city Tenn
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
o.k.I got the injectors.They are extreme psi.which I called up the company and they said they were the same as RC racing.now I have to get a fuel rail started.any help you guys can give me on the install or afc setting would be great.Please some pics of your turbo setup so I can get some ideas.
Thread
Thread Starter
Forum
Replies
Last Post