2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Need a little help...

Thread Tools
 
Search this Thread
 
Old 10-30-04, 09:54 AM
  #1  
Big Snail

Thread Starter
 
93FD3S's Avatar
 
Join Date: Dec 2001
Location: San Antonio
Posts: 1,230
Likes: 0
Received 3 Likes on 3 Posts
Need a little help...

I installed a 2nd Gen leading coil in my FD and was wondering does it really matter how the plug wires are connected as long as the wires are from the leading plugs? Because unlike the FD leading coil which is marked, the FC leading coil has no marks. For instance would the front leading plug go to the left plug on the leading coil and the rear leading plug to right plug on the leading coil? I would assume it wouldn't matter since the plugs are on the coil. Thanks...Tony
Old 10-30-04, 10:13 AM
  #2  
Lives on the Forum

 
WAYNE88N/A's Avatar
 
Join Date: Feb 2004
Location: Coldspring TX
Posts: 5,721
Likes: 0
Received 2 Likes on 2 Posts
It shouldn't matter, because the leadings fire at the same time. But, if you're worried about it, if you're holding the coil in front of you with the plug wire bosses at the top, the left would be L1. S4's, anyway...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sleepydogz
Old School and Other Rotary
8
10-04-15 03:46 PM
pjr
Suspension/Wheels/Tires/Brakes
13
09-03-15 11:44 AM
damon
1st Generation Specific (1979-1985)
6
08-08-02 01:52 PM
ddr10
3rd Generation Specific (1993-2002)
14
07-12-02 09:40 AM
autocrash
2nd Generation Specific (1986-1992)
5
05-01-02 07:59 AM



Quick Reply: Need a little help...



All times are GMT -5. The time now is 02:17 PM.