flyingivan

Need help concerning my 1986 13b rx7 non turbo .... all stock with rebuild as far as i know i replaced a fuel line that was leaking for that i had to remove some intake hoses i did put them back on... now when the car starts it gos up to about 3000rpm... then tries idleing at about 300rpm and eventually dies.. the idle screw dosnt seem to have any effect...after the car warms up it idles fine as long as its sitting still... BUT! when the car is in in motion and i push the clutch in it will die unless i keep my foot on the throtle and its kind of difficult when im trying to stop not being in neutral.. please help anything will be appreciated i will post a video of the issues 2morrow morning ..... thanks

-Ivan

jjcobm

iTrader: (18)

Vacuum leak.

flyingivan

thank you i will look for it 2morrow.... i will make a video either way if i do or do not find a solution so it will help others.

wjk0817

iTrader: (3)

I've had some idle problem myself.
so I've asked mechs, friends and searched the web
it all comes down to either vacuum leaks or tps or tbody kinda problems.

like jjcobm mentioned, check ur vacuum leak

flyingivan

Got the problem fixed idles like a charm thanks guys ! heres some pics

jjcobm

iTrader: (18)

You have proven yourself worthy of problem solving. I congratulate you. Most people would of kept posting on here asking where their leak is, as for you, you took our advice and found the problem. You are a great example to all the new people here : )

lunardeathgod

... i see what you did there...

flyingivan

Thanks that means alot ...
ill be posting more im havin little issues with the rx7 hopefully you guys can help especially with your expierence.

flyingivan

haha i was hoping you would lol