need help with injectors.
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Centralia, WA, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
need help with injectors.
im going to be running a garrett t04, (voskos) old one, we believe its the "h" trim.
I was going to run it at 1 bar of boost.
I don't want to hear that Im going to blow my engine without a haltech...just curious about what you guys would do.
Run two 1600 cc secondaries?
or run 4 720 cc?
i do have afc. and of course ...fuel pump.
my engine is going to be street ported and a front mount, and Im assuming Ill be real close to 300rwhp @ 1 bar.
So I quess, what injectors do I need to support lets say 300rwhp??
I was going to run it at 1 bar of boost.
I don't want to hear that Im going to blow my engine without a haltech...just curious about what you guys would do.
Run two 1600 cc secondaries?
or run 4 720 cc?
i do have afc. and of course ...fuel pump.
my engine is going to be street ported and a front mount, and Im assuming Ill be real close to 300rwhp @ 1 bar.
So I quess, what injectors do I need to support lets say 300rwhp??
Last edited by goodspeed; 05-28-02 at 12:59 PM.
#2
knowledge junkie
I believe 720 secondaries and ~650 cc primaries would be fine for 300hp. I've heard 1600 cc is too ritch unless you have a HUGE turbo.
Just make sure to chart your air/fuel ratio
Just make sure to chart your air/fuel ratio
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM