Need Help with 87 RX-7 TII
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: Charlette, NC
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Need Help with 87 RX-7 TII
there are a couple problems i have ran in to with my rx7.
First is i cant no locate were to plug that O2 sencer up to the wire harness.
second is that when i crank the car it take bout 20 secs to fire up and when it dos it revs to about 1200rpm and once i let go of the ignition it dies down.
Will the car not start with the o2 sencer not pluged in?
Thanks for the Help
First is i cant no locate were to plug that O2 sencer up to the wire harness.
second is that when i crank the car it take bout 20 secs to fire up and when it dos it revs to about 1200rpm and once i let go of the ignition it dies down.
Will the car not start with the o2 sencer not pluged in?
Thanks for the Help
#3
Junior Member
Thread Starter
Join Date: May 2006
Location: Charlette, NC
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
i know the connector u r talking about but the o2 sencer line is not long enouch to ge to the connector do i have to take the upper intake manifold/throttle body back off to give it enouch slake to get to the connector?
Thread
Thread Starter
Forum
Replies
Last Post
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM