need help...
05-16-02, 07:20 PM
#1
HyperREV.com
Thread Starter
Join Date: Mar 2001
Location: Oregon
Posts: 1,162
Likes: 0
Received 0 Likes
on
0 Posts
need help...
ok, i finally got all the parts to piece my car together, however when i sold my old wiring harness i accidentally left some of the sensors/relays attached to it..DUH!
the ones im talkin about are near the ecu area, behind the plastic kick panel in the pass side. i.e. the atmospheric pressure sensor, knock control unit etc.
ok well i have the knock control unit, the pressure sensor, and the control fan unit. what else is left? im pretty sure im missing either 1 or 2, cause i remember more little boxes in that area?
thankyou,
brandon
the ones im talkin about are near the ecu area, behind the plastic kick panel in the pass side. i.e. the atmospheric pressure sensor, knock control unit etc.
ok well i have the knock control unit, the pressure sensor, and the control fan unit. what else is left? im pretty sure im missing either 1 or 2, cause i remember more little boxes in that area?
thankyou,
brandon
05-17-02, 03:17 PM
#5
Has been.. hangin' around
Join Date: Mar 2001
Location: Milpitas, CA
Posts: 2,618
Likes: 0
Received 0 Likes
on
0 Posts
A - identify your car.
B - The back of the FSM, in the wiring diagrams section, on the very back of that section, has a diagram of the entire front harness. Tracing the connectors on your harness and matching those to the front harness diagram should tell you which ones you don't have.
HTH, but as I recall, most of those connectors were to HVAC controls, audio stuff, and the things you've already mentioned. On my racecar, the only only connector I have left, aside from the Engine harness connectors, is the atmospheric pressure sensor. Sorry :\
PaulC
B - The back of the FSM, in the wiring diagrams section, on the very back of that section, has a diagram of the entire front harness. Tracing the connectors on your harness and matching those to the front harness diagram should tell you which ones you don't have.
HTH, but as I recall, most of those connectors were to HVAC controls, audio stuff, and the things you've already mentioned. On my racecar, the only only connector I have left, aside from the Engine harness connectors, is the atmospheric pressure sensor. Sorry :\
PaulC
Thread
Thread Starter
Forum
Replies
Last Post
sleepydogz
Old School and Other Rotary
8
10-04-15 03:46 PM
autocrash
2nd Generation Specific (1986-1992)
5
05-01-02 07:59 AM