Name these crazy 2nd gen parts
11-18-03, 11:58 AM
#28
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Icemark
Some of the replies are slightly off:
#1 is a bac valve off of a 86-88 Non-turbo
Some of the replies are slightly off:
#1 is a bac valve off of a 86-88 Non-turbo
My GXLs N/A is using a Turbo S4 BACV.. Unless the seller was dishonest..
11-18-03, 08:44 PM
#31
Former Moderator. RIP Icemark.
Originally posted by Mr. Gadget
What are we going to play next - "name the tv series and car Bill Bixby drove" trifecta...
What are we going to play next - "name the tv series and car Bill Bixby drove" trifecta...
11-26-03, 07:55 PM
#32
SKELETOR!
Thread Starter
Join Date: Mar 2003
Location: Prescott Valley, AZ
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Youre only half right, Icemark. I have a pretty decent memory, so everything I am learning about these parts and functions sticks in my head for future reference.
Anyhow, I got more parts, and will play the game again....brb...
Anyhow, I got more parts, and will play the game again....brb...
11-26-03, 08:25 PM
#36
Former Moderator. RIP Icemark.
1. 86 coolant overflow tank
2. 86-88 Non turbo Vacuum pipe for BAC and AWS
3. 86-91 Non turbo oil filter pedestal
4. 86-88 Non-turbo throttle body vacuum spacer/router.
2. 86-88 Non turbo Vacuum pipe for BAC and AWS
3. 86-91 Non turbo oil filter pedestal
4. 86-88 Non-turbo throttle body vacuum spacer/router.
11-26-03, 09:35 PM
#40
Former Moderator. RIP Icemark.
Originally posted by Cody
The coolant overflow tank was only 86 specific?
The coolant overflow tank was only 86 specific?
The 87+ moved it from the fender out between the bumper and the rad.
11-26-03, 10:07 PM
#41
I wish I was driving!
Originally posted by Icemark
Hmm, I think the Turbo BAC has a slightly different plug (the guide pin is offset instead of in the middle).
Hmm, I think the Turbo BAC has a slightly different plug (the guide pin is offset instead of in the middle).
The N/A BAC is not adjustable (easy idle setting for turbos), and the plug connectors face different directions.
If you put a N/A BAC on a TII, the plug will then face towards the passeneger side hood, as opposed to the passanger side frame-rail, and you will have to set the idle via the secondary throttle stop plates.
I only know this is true for S4's.
11-26-03, 10:12 PM
#42
I wish I was driving!
5. Oil pump drive gear. (86- 91)
6. Front stationary gear. (86-91)
7. Front Pulley (19mm) bolt. (86-91)
8. Crank angle sensor drive gear. (all series of RX-7's)
6. Front stationary gear. (86-91)
7. Front Pulley (19mm) bolt. (86-91)
8. Crank angle sensor drive gear. (all series of RX-7's)
11-26-03, 10:25 PM
#43
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 3 Likes
on
3 Posts
should be A, B,C, D Scathcart, he lettered them this time and number the switches.
5 thru 8 are switches
5. wiper switch assembly including rear wiper and rear window cleaner switch and hazard light switch
6. headlight switch including the up/down switch to bring the lights up but not turn them on, and the rear window defrost which is standard on the GXL
7. Cruise control switch (standard on GXL)
8. Turn signal switch, high beam when you pull back on the lever
5 thru 8 are switches
5. wiper switch assembly including rear wiper and rear window cleaner switch and hazard light switch
6. headlight switch including the up/down switch to bring the lights up but not turn them on, and the rear window defrost which is standard on the GXL
7. Cruise control switch (standard on GXL)
8. Turn signal switch, high beam when you pull back on the lever
Last edited by Project84; 11-26-03 at 10:29 PM.
11-27-03, 08:14 AM
#46
Originally posted by Cody
I was able to pick this FC up pretty cheap. Ever since January when I bought my FB, I have been intrigued..almost to the point of insanity about rotaries.
This FC ran fine...but, since I already have 1, I figured I'd take this one apart, and learn more about them as I go.
While we're waiting for me to post more parts....what are the basic functions or purposes of the items not yet explained?
I was able to pick this FC up pretty cheap. Ever since January when I bought my FB, I have been intrigued..almost to the point of insanity about rotaries.
This FC ran fine...but, since I already have 1, I figured I'd take this one apart, and learn more about them as I go.
While we're waiting for me to post more parts....what are the basic functions or purposes of the items not yet explained?
