Name these crazy 2nd gen parts
#1
SKELETOR!
Thread Starter
Join Date: Mar 2003
Location: Prescott Valley, AZ
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Name these crazy 2nd gen parts
Hey 2nd gen people....
I figure you guys (& girls) would know best what these crazy lookin things are that I have been stripping from my FC.
What are the names of these parts?
1.
2.
3.
I'll be posting more as I strip them off. Some things, I basically know what they are....but am wondering if they have a weird name since they are Rx7 parts.
I figure you guys (& girls) would know best what these crazy lookin things are that I have been stripping from my FC.
What are the names of these parts?
1.
2.
3.
I'll be posting more as I strip them off. Some things, I basically know what they are....but am wondering if they have a weird name since they are Rx7 parts.
Trending Topics
#16
SKELETOR!
Thread Starter
Join Date: Mar 2003
Location: Prescott Valley, AZ
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
I was able to pick this FC up pretty cheap. Ever since January when I bought my FB, I have been intrigued..almost to the point of insanity about rotaries.
This FC ran fine...but, since I already have 1, I figured I'd take this one apart, and learn more about them as I go.
While we're waiting for me to post more parts....what are the basic functions or purposes of the items not yet explained?
This FC ran fine...but, since I already have 1, I figured I'd take this one apart, and learn more about them as I go.
While we're waiting for me to post more parts....what are the basic functions or purposes of the items not yet explained?
#17
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
1. Control idle better when there is more load on the engine (electrical).
2. Incorperates the BAC into the intake system as well as other vacuum powered sensors, Air Temp Sensor.. etc..
3. Integral to determining spark
4. Just intake runners essentially
5. Part of the cooling system - Has cooling temp sensor and thermostat mount.
6. Directs air flow from the air pump back into the intake manifold or dump to the exhaust.
7. Just an AC mount and tensioner pulley
8. Makes the car 'go' when you press the 'gas'.
2. Incorperates the BAC into the intake system as well as other vacuum powered sensors, Air Temp Sensor.. etc..
3. Integral to determining spark
4. Just intake runners essentially
5. Part of the cooling system - Has cooling temp sensor and thermostat mount.
6. Directs air flow from the air pump back into the intake manifold or dump to the exhaust.
7. Just an AC mount and tensioner pulley
8. Makes the car 'go' when you press the 'gas'.
Last edited by Black13B; 11-17-03 at 07:04 PM.
#22
OH,YOU TOUCHED MY TRALALA
Join Date: Jan 2003
Location: st.louis mo
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
i ran mine with the UIM removed. ran it off starter fluid. lost alot of carbon off that trick. and it sounded bitch. intake was louder than the exsaust.
ej
ej
#23
Former Moderator. RIP Icemark.
Some of the replies are slightly off:
#1 is a bac valve off of a 86-88 Non-turbo
#2 is a Dynamic chamber off of a 86-88 Non-turbo
#3 is a Crank Angle Sensor off of a 86-91 FC
#4 is a Upper intake manifold off of a 86-88 Non-Turbo
#5 is a water pump housing off of a 86-88 Non Turbo
#6 is a Air Control valve off of a 86-88 non turbo
#7 is a Air conditioning Compressor mounting bracket off of a 86-91 RX-7
#8 is a Throttle body from a 86-88 RX-7
#1 is a bac valve off of a 86-88 Non-turbo
#2 is a Dynamic chamber off of a 86-88 Non-turbo
#3 is a Crank Angle Sensor off of a 86-91 FC
#4 is a Upper intake manifold off of a 86-88 Non-Turbo
#5 is a water pump housing off of a 86-88 Non Turbo
#6 is a Air Control valve off of a 86-88 non turbo
#7 is a Air conditioning Compressor mounting bracket off of a 86-91 RX-7
#8 is a Throttle body from a 86-88 RX-7