na and t2 intake manifolds.
07-03-10, 04:57 PM
#1
dAracIngPhaRmaCist
Thread Starter
Join Date: Mar 2004
Location: Fort Lauderdale
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
na and t2 intake manifolds.
Hey all. One of my friends has an 87 na and is about to turbo it. They stated that they have the upper portion of the t2 intake manifold, but not the LIM nor the lower part of the UIM. My question is whether the top portion of the UIM will bolt to the lower part of the na manifold. Or if he would need to purchase those two pieces before we begin installing stuff. Any help is appreciated. I don't have a NA manifold here with me to compare the differences myselft. (Also, if this was already answered, I'm sorry I couldn't search. I am posting this from a cellphone making it hard to navigate the site.)
07-03-10, 06:32 PM
#3
The best bet for that is to get a complete Tii intake manifold set and port match it to the 6 port keg. How you do that is up to you. If I am not mistaken at one point Japan2la had a few already modified tii lim's that were matched to the 6 port setup. If you dont have the skill to do such things that would be the best option.
07-04-10, 10:44 AM
#5
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
You can't mix and match manifolds. You need to either use the entire NA manifold setup, or the entire TII manifold setup. If you want to mix, then custom fabrication is necessary.
http://www.aaroncake.net/rx-7/4PortLIMTo6Port.htm
http://www.aaroncake.net/rx-7/4PortLIMTo6Port.htm
