Is my turbo good or bad?...
04-12-06, 12:15 AM
#1
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Is my turbo good or bad?...
Long story short, i bought a turbo, opened the package, looked it over and checked the shaft play, it has none front-to-back but it moves side-to-side....
it moves enough when you move it that the compressor wheel touches the compressor housing, when i move it you can hear the compressor wheel tapping against the side....
from my understanding it is normal to have a certain bit of movement from side-to-side due to the journal berrings?...
i wanted to get some information about this right away, thanx for your help in advance....
-Anthony
it moves enough when you move it that the compressor wheel touches the compressor housing, when i move it you can hear the compressor wheel tapping against the side....
from my understanding it is normal to have a certain bit of movement from side-to-side due to the journal berrings?...
i wanted to get some information about this right away, thanx for your help in advance....
-Anthony
Last edited by Archangels; 04-12-06 at 12:18 AM.
04-12-06, 12:41 AM
#4
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
* Update *
I just checked it again, if i try to move it gently it doesent move, i have to try a bit for it to move, and even then it sounds like berrings?...
I just checked it again, if i try to move it gently it doesent move, i have to try a bit for it to move, and even then it sounds like berrings?...
04-12-06, 01:38 AM
#6
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slpin
it is fine
stop messing with it.
are you having problems?
it could still last a long time, you arent suppose to force it to see if it will touch.
stop messing with it.
are you having problems?
it could still last a long time, you arent suppose to force it to see if it will touch.
i never thought even with a little force it should ever do that....
04-12-06, 01:43 AM
#7
side to side movement is normal, afterall, if you have "no play" how could you move?
general rule is, if it doesnt touch the housing, it is good
as for you? you are fine. i would just run it, and just go easy on it so you get more life out of it (agreed? you broke *** fc owners). when the shaftplay gets great enough, it will damage one of the oil rings and will smoke... great indication, isnt it? even though you could run it for a bit...
just check it every once in a while for the blade condition... once the comrpessor starts shaving itself on the housing,, time for a new one... afterall, there is only one way the metal dust could go, right?
general rule is, if it doesnt touch the housing, it is good
as for you? you are fine. i would just run it, and just go easy on it so you get more life out of it (agreed? you broke *** fc owners). when the shaftplay gets great enough, it will damage one of the oil rings and will smoke... great indication, isnt it? even though you could run it for a bit...
just check it every once in a while for the blade condition... once the comrpessor starts shaving itself on the housing,, time for a new one... afterall, there is only one way the metal dust could go, right?
Trending Topics
04-12-06, 01:51 AM
#8
- Make Haste -
Thread Starter
Join Date: Apr 2005
Location: Calgary, Alberta
Posts: 1,648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slpin
side to side movement is normal, afterall, if you have "no play" how could you move?
general rule is, if it doesnt touch the housing, it is good
as for you? you are fine. i would just run it, and just go easy on it so you get more life out of it (agreed? you broke *** fc owners). when the shaftplay gets great enough, it will damage one of the oil rings and will smoke... great indication, isnt it? even though you could run it for a bit...
just check it every once in a while for the blade condition... once the comrpessor starts shaving itself on the housing,, time for a new one... afterall, there is only one way the metal dust could go, right?
general rule is, if it doesnt touch the housing, it is good
as for you? you are fine. i would just run it, and just go easy on it so you get more life out of it (agreed? you broke *** fc owners). when the shaftplay gets great enough, it will damage one of the oil rings and will smoke... great indication, isnt it? even though you could run it for a bit...
just check it every once in a while for the blade condition... once the comrpessor starts shaving itself on the housing,, time for a new one... afterall, there is only one way the metal dust could go, right?
i'll run this one for a bit and get the current, toasted one upgraded by BNR....
aslong as my 720cc's will fuel the BNR3, i should be ok....
Thread
Thread Starter
Forum
Replies
Last Post