My T2 has another Honda part!
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Dover NH
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
My T2 has another Honda part!
Its actually the 2nd Honda part on my T2(rag now(if closeminded))! Remember my Teg taillights? Het me if you must but, I used the exhaust valve from an H22 as my new wastegtae door. Took the angle grinder to it and reshaped it a bit, cut the stem off it, cut the old WG "door" off, ported the death outta the stock WG, welded it in and said good by to WG induced overboosting(I hope)! I havent tuned it yet, but I am hpoing that at around 11 lbs of boost I can , now, hit the N20 button , in 2nd, 3rd, and 4th gear and see little waivering in boost PSI. The stock WG I can bairly fit my pinky in it, now I can wiggle my thumb around in it!! I told you guys Honda made some parts of worth!!!
#7
Originally posted by boostmotorsport
dre-you are a dick.
dre-you are a dick.
Trending Topics
#9
Super Newbie
Last edited by Felix Wankel; 08-04-02 at 07:26 PM.
#10
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Re: My T2 has another Honda part!
Originally posted by boostmotorsport
I used the exhaust valve from an H22 as my new wastegtae door. Took the angle grinder to it and reshaped it a bit, cut the stem off it, cut the old WG "door" off, ported the death outta the stock WG, welded it in...
I used the exhaust valve from an H22 as my new wastegtae door. Took the angle grinder to it and reshaped it a bit, cut the stem off it, cut the old WG "door" off, ported the death outta the stock WG, welded it in...
#11
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Dover NH
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
I couldnt find any way to retain that "pivot" you speak of. I just made sure that with the actuator arm pulling on it closed it would fit flush. I havent noticed any difference in spool time. Realistically a tiny exhaust passage around the door shouldnt have any huge affect(IMO)anyway.
Dre how much custom work have you done to your rex? Still got those dated *** tails on there huh? Forum members who just make useless and negative posts should be banned. Infact have you ever added anything worthwhile here? I cant remember any good posts of yours and Ive been a member for the past 5 years.
Dre how much custom work have you done to your rex? Still got those dated *** tails on there huh? Forum members who just make useless and negative posts should be banned. Infact have you ever added anything worthwhile here? I cant remember any good posts of yours and Ive been a member for the past 5 years.
#14
Full Member
Join Date: Sep 2001
Location: Winnipeg, MB
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
GAH! well its not my cup of tea but to each his own. keep at it... just keep it away from vtec stickers.
one question though. not too be rude, but why didnt you just buy an integra?
one question though. not too be rude, but why didnt you just buy an integra?
Last edited by Flavour; 08-05-02 at 03:34 AM.
#16
SCCA Rookie
Join Date: May 2001
Location: Sterling Heights, MI
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
I guess it doesn't look really horrible (did a good job on the conversion), and it almost looks like it fits correctly with the car (I had a green '96 GS-R), but.. something about Integra taillights on an RX-7 just doesn't sound right when you think about it.
#17
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Dover NH
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
This thread was intended to be about wastegates, funny people are more concerned about my taillights than a good cost effective motor mod, that solves a notorious T2 problem.