2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

My steering wobbles during a slight right turn

Thread Tools
 
Search this Thread
 
Old 11-19-06 | 09:11 PM
  #1  
kevino's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2001
Posts: 336
Likes: 0
From: lancaster pennsylvania
My steering wobbles during a slight right turn

88TII

My steering wobbles pretty bad when I make a very slight gradual right turn at around 55 to 60 mph (it feels like a problem with the left front wheel). At first I figured that my tires were unbalanced because they were pretty worn. However I recenty got 4 brand new tires and the problem still exists. The next thing I did was to check the front hubs. I repacked the bearings and tighted the hubs and still this problem exists. Any ideas of what might be causing this? Is this a problem with the steering rack?

thanks
Old 11-19-06 | 09:57 PM
  #2  
AM87''s Avatar
Junior Member
 
Joined: Oct 2006
Posts: 32
Likes: 0
From: Tigard, OR
i have a smilar problem, it kinda feels like the car floats around... at the same speeds you said. it also got worse for me after installing a front strut tower bar, i still dont know what it is.
Old 11-19-06 | 10:04 PM
  #3  
EricRyan's Avatar
Autocrossed. I got CONED!

iTrader: (4)
 
Joined: Jun 2006
Posts: 629
Likes: 0
From: Lake Charles, LA
Unbalanced tires wouldn't affect just a turn, it would affect straight line shaking after 45-60mph and cornering at those speeds as well. You could have a bad inner or outer tie-rod on either side if it's just on right turns. Jack up one side at a time, push the top of the tire inward repeatedly and check for excessive play, then push/pull the tire at 3 o'clock position with right hand and 9 o'clock position with left hand and feel for excessive play. It never hurts to have another person underneath the car looking for loose parts while doing this. Good luck.
Old 11-20-06 | 02:25 PM
  #4  
kevino's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2001
Posts: 336
Likes: 0
From: lancaster pennsylvania
I think I checked for play after I tighted the hubs, but I'll check again to be sure. thanks
Old 06-03-07 | 02:02 AM
  #5  
kevino's Avatar
Thread Starter
Senior Member
 
Joined: Dec 2001
Posts: 336
Likes: 0
From: lancaster pennsylvania
For anyone who found this post searching, the problem was a bad ball joint.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ncds_fc
2nd Generation Specific (1986-1992)
17
09-10-15 04:52 AM
NCross
1st Generation Specific (1979-1985)
9
08-29-15 02:55 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 06:30 PM




All times are GMT -5. The time now is 05:22 AM.