My project car runs! (lots of pics)
Trending Topics
#15
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jacobcartmill
looks like a t04 hybrid. stock hotside and t04 compressor housing/wheel ?
looks like a t04 hybrid. stock hotside and t04 compressor housing/wheel ?
Hybrid 60-1 HiFi coldside on stock S5 hotside
#16
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by benny_rx_blanco
that yellow is gonna burn off quick...
that yellow is gonna burn off quick...
Nope, it is powdercoated on. Definately not going anywhere. This turbo is actually used, so I did not pick the colour.
#18
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
The rest of my mods are as follows:
'91 Jspec 13BT
Haltech E6K
Hybrid 60-1 turbo
Walbro 255 l/hr fuel pump
-6 AN aeromotive fuel lines and fittings
720 cc/min primary injectors
1600 cc/min secondary injectors
no P/S
no A/C
no sound system
no spare tire
Thunderfabrications 3" MP/DP combo
Racing Beat cat-back
S6 alternator
10 gauge wire from alternator to battery
E-fan
ACT 6 puck clutch
ACT Heavy Duty pressure plate
GReddy Profec B
Boost gauge (not working for some reason?)
EGT gauge
Fuel pressure gauge
Water temp gauge
Honda 3" polished intake w/ cone filter
GReddy type-S BOV
I think that about covers it...
'91 Jspec 13BT
Haltech E6K
Hybrid 60-1 turbo
Walbro 255 l/hr fuel pump
-6 AN aeromotive fuel lines and fittings
720 cc/min primary injectors
1600 cc/min secondary injectors
no P/S
no A/C
no sound system
no spare tire
Thunderfabrications 3" MP/DP combo
Racing Beat cat-back
S6 alternator
10 gauge wire from alternator to battery
E-fan
ACT 6 puck clutch
ACT Heavy Duty pressure plate
GReddy Profec B
Boost gauge (not working for some reason?)
EGT gauge
Fuel pressure gauge
Water temp gauge
Honda 3" polished intake w/ cone filter
GReddy type-S BOV
I think that about covers it...
Last edited by ponykiller; 04-10-03 at 06:14 PM.
#19
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dr0x
Powdercoating isnt heat resistant last time I checked.. Either way I would sand blast it or something and get it off. Icky
Powdercoating isnt heat resistant last time I checked.. Either way I would sand blast it or something and get it off. Icky
Like I said, it is a used turbo and it has not come off yet.
Since when is powdercoating not heat resistant?
#21
Originally posted by pengarufoo
that car looks so hacked together, what a waste of money on a decent standalone ecu.
that car looks so hacked together, what a waste of money on a decent standalone ecu.
Car looks good pony, and I know the feeling of getting something running finally!
#22
Junior Member
Join Date: Jan 2003
Location: baton rouge la.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
i agree. keep it to yourself if you don't like it. try to use a little tact why don't ya. keep it going pony. really coming together nicely.
and by the way.... $10 says it'd beat the crap out what ever that guys running..
and by the way.... $10 says it'd beat the crap out what ever that guys running..
#24
Originally posted by 1FastT2
Guys, Turbonetics offers their turbos with a powdercoated compressor housing so I dought its going to burn off.
Guys, Turbonetics offers their turbos with a powdercoated compressor housing so I dought its going to burn off.