2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

My oil filter won't budge PLEASE HELP ME!!!

Thread Tools
 
Search this Thread
 
Old 03-11-07 | 06:36 PM
  #1  
fcunderwater's Avatar
Thread Starter
Full Member
 
Joined: Nov 2006
Posts: 175
Likes: 0
From: Seaside, CA
My oil filter won't budge PLEASE HELP ME!!!

My oil filter is stuck on there like nobodies business and it's really starting to **** me off. Not even my handy dandy filter wrench can make it budge. PLEASE SOMEBODY GIVE ME A TIP OR TRICK THAT YOU USE SO THAT I DON'T HAVE TO TAKE THE CITY BUS TO SCHOOL TOMORROW!
Old 03-11-07 | 06:38 PM
  #2  
Secondmessiah's Avatar
Rotary enthusiast

 
Joined: Mar 2006
Posts: 664
Likes: 0
From: Connecticut
ask your mom to help

the first time i changed my oil, i couldnt get the filter undone but my mom could
Old 03-11-07 | 06:42 PM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,793
Likes: 119
From: London, Ontario, Canada
Jam a screwdriver through it and then turn it with the screwdriver. Old mechanic's trick...
Old 03-11-07 | 06:45 PM
  #4  
fcunderwater's Avatar
Thread Starter
Full Member
 
Joined: Nov 2006
Posts: 175
Likes: 0
From: Seaside, CA
Yeah I was trying to jam a screwdriver in it, but mainly cause I was so pissed off. Now that I know that my actions are justified I'm going to go smash that **** to pieces Thanks!

and if push comes to shove and it won't come off I'm gonna ask my mom. haha
Old 03-11-07 | 06:48 PM
  #5  
SpooledupRacing's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2006
Posts: 3,717
Likes: 0
From: Comstock Park, MI 49321
Originally Posted by Aaron Cake
Jam a screwdriver through it and then turn it with the screwdriver. Old mechanic's trick...

+1 I just did my first oil change on my 7 yesterday and I could'ntr et it off so I stuck a screwdriver in the side and then it came off with a bit of abuse lol..

make sure to lube the gasket up very good so it dont happen again..

put some rags under and around the filter to and have some brake cleaner handy to clean any messes

Dave
Old 03-11-07 | 06:53 PM
  #6  
mightymite's Avatar
Senior Member

iTrader: (1)
 
Joined: May 2006
Posts: 363
Likes: 0
From: southern indiana
Originally Posted by SpooledupRacing
+1 I just did my first oil change on my 7 yesterday and I could'ntr et it off so I stuck a screwdriver in the side and then it came off with a bit of abuse lol..

make sure to lube the gasket up very good so it dont happen again..

put some rags under and around the filter to and have some brake cleaner handy to clean any messes

Dave
+2 on the screwdriver trick
Old 03-11-07 | 06:54 PM
  #7  
fcunderwater's Avatar
Thread Starter
Full Member
 
Joined: Nov 2006
Posts: 175
Likes: 0
From: Seaside, CA
I think this filter is the hardest one I've ever had to deal with. I've done plenty of them and usually when it's stuck my wrench can get it off but damn this ones a bitch...
Old 03-11-07 | 07:09 PM
  #8  
7dust's Avatar
Irregular Here
iTrader: (14)
 
Joined: Dec 2003
Posts: 3,075
Likes: 4
From: Alvin, TX
Don't be a *****.
Old 03-11-07 | 07:15 PM
  #9  
Longshoe's Avatar
The Shogun of Harlem

iTrader: (2)
 
Joined: Jul 2005
Posts: 420
Likes: 0
From: Jonesboro, Georgia
I personally like to use a set of giant vice grips.
Old 03-11-07 | 07:27 PM
  #10  
Turbo II's Avatar
It's only Rock and Roll
iTrader: (1)
 
Joined: Sep 2004
Posts: 2,509
Likes: 0
From: In a house...
Originally Posted by Aaron Cake
Jam a screwdriver through it and then turn it with the screwdriver. Old mechanic's trick...
I didn't see that in the stickys.....

Old Mechanic's Tricks


Yeah I've done it before... made a mess!
Old 03-11-07 | 07:39 PM
  #11  
SpooledupRacing's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2006
Posts: 3,717
Likes: 0
From: Comstock Park, MI 49321
if u do it high enough and tap the scredriver in with a hammer instead of bustin it all up it wont be messy at all
Old 03-11-07 | 07:55 PM
  #12  
Turbo II's Avatar
It's only Rock and Roll
iTrader: (1)
 
Joined: Sep 2004
Posts: 2,509
Likes: 0
From: In a house...
I had to do it on my 1970 Dodge Challenger back in the day... First try went in fine but couldn't get it to turn, just made a bigger hole! Second try same thing so I just tore it apart and finally put a pair of vice grips on it and got it off.
Old 03-11-07 | 08:00 PM
  #13  
Sideways7's Avatar
Lives on the Forum
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 9
From: Temple, Texas (Central)
If you drain the oil out and wait a bit, then there wont be any oil in the filter, FYI.
Old 03-11-07 | 08:03 PM
  #14  
Turbo II's Avatar
It's only Rock and Roll
iTrader: (1)
 
Joined: Sep 2004
Posts: 2,509
Likes: 0
From: In a house...
Other than that one I've never had one on anything else give me a problem. I should have punched a hole in the bottom and let it drain but at the time...
Old 03-11-07 | 08:11 PM
  #15  
Sideways7's Avatar
Lives on the Forum
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 9
From: Temple, Texas (Central)
In fact, if the car hasn't run in a while there shouldn't be any oil in the filter anyway.
That said, we have it so easy changing out oil filters. You should try my wife's Mazda 6. The filter is wedged above the exhaust manifold in a way that you cant get a filter wrench around it without being a contortionist. I don't even do the oil changes on her car anymore, I just take it to a lube place....
Old 03-11-07 | 08:21 PM
  #16  
Turbo II's Avatar
It's only Rock and Roll
iTrader: (1)
 
Joined: Sep 2004
Posts: 2,509
Likes: 0
From: In a house...
Sounds like the RX-8 from what an owner said at a meet last night. Said it was a pain to get to it also.
Old 03-11-07 | 08:35 PM
  #17  
fcunderwater's Avatar
Thread Starter
Full Member
 
Joined: Nov 2006
Posts: 175
Likes: 0
From: Seaside, CA
now my car won't start...
Old 03-11-07 | 08:37 PM
  #18  
SpooledupRacing's Avatar
Banned. I got OWNED!!!
 
Joined: Aug 2006
Posts: 3,717
Likes: 0
From: Comstock Park, MI 49321
what did u do?
Old 03-11-07 | 08:38 PM
  #19  
Boosted11's Avatar
Pistons are gay

iTrader: (11)
 
Joined: Dec 2006
Posts: 1,973
Likes: 0
From: Prince George, BC
I would try getting a pipe thats a couple feet long so you get more leverage, if its that serious.
Old 03-11-07 | 08:41 PM
  #20  
fcunderwater's Avatar
Thread Starter
Full Member
 
Joined: Nov 2006
Posts: 175
Likes: 0
From: Seaside, CA
Originally Posted by SpooledupRacing
what did u do?
I put in that tune up kit you sold me (except the Fuel filter) and now it sounds like it wants to start it just can't keep it going.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FD7KiD
3rd Generation Specific (1993-2002)
15
02-26-21 11:12 PM
The1Sun
New Member RX-7 Technical
9
03-19-18 12:08 AM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 06:57 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 06:30 PM
FD7KiD
Single Turbo RX-7's
1
08-18-15 12:50 AM




All times are GMT -5. The time now is 11:21 AM.