My Judge Ito Spec StreetPort :)
#51
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Aug 2001
Location: N. New Jersey
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Well guys I didnt think this was going to be a big problem with you all on the way the porting job was done but its not a "normal" port its "Itos" and I have full confidence that with Ito working my engine will deff hit our goal of 200 rwhp or more. And like Vosko said its cool for criticism, and thats what makes things better for the future. But like a few of you guys just look at it and think "wrong" or "never saw that before". Keep your minds open to new ideas and you might learn something new. And I have spent alot of time and money researching my parts and learning alot of new things on the way from the people on the forum and guys like Vosko and Ito who I would think I pissed off alot with all the damn questions I have lol.
Ill have some pics up tomorrow of the engine fully built and the trans apart for the rebuild hopefully. So soon my n/a will be alive agian!
And Dyno results soon to follow so you guys will then maybe think twice about the "Judge Ito Spec Streetport".
Agian thanks for everyone along the way for the help.
*And TED those pics of the port were you see the "scratches" is all from my digicam.
Nick
Ill have some pics up tomorrow of the engine fully built and the trans apart for the rebuild hopefully. So soon my n/a will be alive agian!
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
And Dyno results soon to follow so you guys will then maybe think twice about the "Judge Ito Spec Streetport".
Agian thanks for everyone along the way for the help.
*And TED those pics of the port were you see the "scratches" is all from my digicam.
Nick
Last edited by Flyby116; 11-11-02 at 04:45 PM.
#53
Banned. I got OWNED!!!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
And Dyno results soon to follow so you guys will then maybe think twice about the "Judge Ito Spec Streetport
But like a few of you guys just look at it and think "wrong" or "never saw that before". Keep your minds open to new ideas and you might learn something new
I guess I was wrong to think this way though, and to even question the might and knowledge you guys possess. I feel dumber for having to post my name in the same thread below yours, and I feel smarter just having seen your usernames. I am in awe and humbled by your presence on this forum. Anyone who has a question or comment other than utter praise of yoru accomplishment should be punished or banned.
![rolleyes](https://www.rx7club.com/images/smilies/rolleyes.gif)
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
LET IT BE NOTED THAT THE ABOVE COMMENTS ARE DIRECTED TOWARD THE ORIGINAL POSTER, AND ONLY THE ORIGINAL POSTER.
#56
Banned. I got OWNED!!!
![](https://www.rx7club.com/images/misc/10_year_icon.png)
I for one would like to, but somebody always has to start bitching and whining defending themselves against other people's criticism. IF you dont want to hear people's opinions, dont post pictures and information on the freaking internet for the world to see!
![doh](https://www.rx7club.com/images/smilies/doh.gif)
#59
Senior Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
Join Date: Aug 2001
Location: N. New Jersey
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
**** hypntyz7 I dont have a problem with you or anyone on here so calm down. You give good info that I have learned from so stop flaming my ***. I was just saying my thoughts to some of posts I saw.
Just got back from work and Im tired....need to wake up early for school tom.![Frown](https://www.rx7club.com/images/smilies/frown.gif)
And thanks Erik
Nick
Just got back from work and Im tired....need to wake up early for school tom.
![Frown](https://www.rx7club.com/images/smilies/frown.gif)
And thanks Erik
Nick
#61
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2002
Location: California, Bay Area
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
That port will loose low end because the seperater is ground out, thuus alowing compression to blow charge back into the primary port, even though the 6th ports are closed, it might not loose as much as having them completly open though, and looks like it will have good top end, personally i like the port, looks awesome, will probably flow awesome at high revs.
#62
Rotary Enthusiast
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Oct 2002
Location: California, Bay Area
Posts: 1,165
Likes: 0
Received 0 Likes
on
0 Posts
also has that housing been run before with that port? it looks "dirty" like it was run after porting, not shinny like freshly cut metal, and it does look like 3 water passages are filled in the pic, might be the angle though
#63
Rotary Freak
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally posted by drago86
also has that housing been run before with that port? it looks "dirty" like it was run after porting, not shinny like freshly cut metal, and it does look like 3 water passages are filled in the pic, might be the angle though
also has that housing been run before with that port? it looks "dirty" like it was run after porting, not shinny like freshly cut metal, and it does look like 3 water passages are filled in the pic, might be the angle though
#64
Lives on the Forum
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Originally posted by Judge Ito
that's for you TED.
that's for you TED.
To follow-up my remarks...
I assumed this was without the actuator "rods".  You've explained that you're still using the rods, and this makes a LOT more sense.
The water jacket passage right "behind" the port itself *looks* blocked with epoxy.  The stuff I use looks *exactly* like what it would in the picture, but it looks like it's a bit of photo trickery and lighting - which makes this point moot.
The sanding marks, you've explained, are totally believable.  I tend to sand the sharp edges myself on my ports.
-Ted
#65
NA Powah, Every Hour!
![](/images/misc/20_year_icon.png)
Join Date: Mar 2001
Location: Sacramento, CA, U S of A
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Yo,
Drama, always drama. When are we going to see some real numbers on this beyotch?!
The bullshit stops when the dyno rollers start...
I'm looking forward to seeing the results! Maybe a Renesis swap isn't the only way to go...
Kevin
1989 GTUs "Mmmm, another 60hp to the rear wheels..."
Drama, always drama. When are we going to see some real numbers on this beyotch?!
The bullshit stops when the dyno rollers start...
I'm looking forward to seeing the results! Maybe a Renesis swap isn't the only way to go...
Kevin
1989 GTUs "Mmmm, another 60hp to the rear wheels..."
#66
My cars louder than yours
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: Oct 2001
Location: Augusta, GA
Posts: 1,969
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, nice port job man! I am too excited to see the results on the dyno. To me, that also looks like a tourque killer, but what do i know, i guess if the runners themselves are not touched (much) it wouldnt make that big of a deal with tourque. What exactly is the point of making one big gaping hole if the runners are the same? wouldnt that just be more stress on the side seal itself?
PLEASE DONT FLAME ME, im just asking some questions
Thanks
PLEASE DONT FLAME ME, im just asking some questions
Thanks
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
#67
Rotary Freak
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally posted by RETed
Oh, now this is going to end up personal?  If you're going to start pushing I-make-more-power-than-you-so-you-must-suck-attitude, that **** don't phase me either.  I've been in tiffs some more well-known folks than you, or do you judge me from all my post in the Single Turbos section?  That disappoints me...you were on my list of up-and-coming rotary people to watch, but if you're to push this kind of stinking attitude on me, it's a major disappointment...
To follow-up my remarks...
I assumed this was without the actuator "rods".  You've explained that you're still using the rods, and this makes a LOT more sense.
The water jacket passage right "behind" the port itself *looks* blocked with epoxy.  The stuff I use looks *exactly* like what it would in the picture, but it looks like it's a bit of photo trickery and lighting - which makes this point moot.
The sanding marks, you've explained, are totally believable.  I tend to sand the sharp edges myself on my ports.
-Ted
Oh, now this is going to end up personal?  If you're going to start pushing I-make-more-power-than-you-so-you-must-suck-attitude, that **** don't phase me either.  I've been in tiffs some more well-known folks than you, or do you judge me from all my post in the Single Turbos section?  That disappoints me...you were on my list of up-and-coming rotary people to watch, but if you're to push this kind of stinking attitude on me, it's a major disappointment...
To follow-up my remarks...
I assumed this was without the actuator "rods".  You've explained that you're still using the rods, and this makes a LOT more sense.
The water jacket passage right "behind" the port itself *looks* blocked with epoxy.  The stuff I use looks *exactly* like what it would in the picture, but it looks like it's a bit of photo trickery and lighting - which makes this point moot.
The sanding marks, you've explained, are totally believable.  I tend to sand the sharp edges myself on my ports.
-Ted
#68
Rotary Freak
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Originally posted by RarestRX
Yo,
Drama, always drama. When are we going to see some real numbers on this beyotch?!
The bullshit stops when the dyno rollers start...
I'm looking forward to seeing the results! Maybe a Renesis swap isn't the only way to go...
Kevin
1989 GTUs "Mmmm, another 60hp to the rear wheels..."
Yo,
Drama, always drama. When are we going to see some real numbers on this beyotch?!
The bullshit stops when the dyno rollers start...
I'm looking forward to seeing the results! Maybe a Renesis swap isn't the only way to go...
Kevin
1989 GTUs "Mmmm, another 60hp to the rear wheels..."
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
#70
NA Powah, Every Hour!
![](/images/misc/20_year_icon.png)
Join Date: Mar 2001
Location: Sacramento, CA, U S of A
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Yo,
Nitrous?! Nitrous?! Bah! I ain't usin' no power adders except what God intended: Air. *grin* I'm big on the Naturally Aspirated thang, hence the reason I'm interested to see this motor strut it's stuff!
*rubs hands* Looking forward to the results. You should videotape it! My mostly stock GTUs put down 140rwhp. It'll be interesting to see what this one does.
Running a true dual exhaust and S-AFC and all that good stuff I assume?
Kevin
1989 GTUs "I need that stuff..."
Nitrous?! Nitrous?! Bah! I ain't usin' no power adders except what God intended: Air. *grin* I'm big on the Naturally Aspirated thang, hence the reason I'm interested to see this motor strut it's stuff!
*rubs hands* Looking forward to the results. You should videotape it! My mostly stock GTUs put down 140rwhp. It'll be interesting to see what this one does.
Running a true dual exhaust and S-AFC and all that good stuff I assume?
Kevin
1989 GTUs "I need that stuff..."
#71
Your Opinion is Wrong
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Join Date: Feb 2001
Location: Peoples Republic of California
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Man, you ask for a little tech behind something different and everyone gets all butt-hurt.
You guys need to check the egos at the door and disscuss, level-headed the tech behind this stuff. I would LOVE to learn some of this stuff, but every tech thread disenigrates into a damn flame war.
No-one is questioning your intelegences, or your accomplishments, they are just trying to UNDERSTAND. Yelling and saying 'trust me' doesn't help people understand.
You guys need to check the egos at the door and disscuss, level-headed the tech behind this stuff. I would LOVE to learn some of this stuff, but every tech thread disenigrates into a damn flame war.
No-one is questioning your intelegences, or your accomplishments, they are just trying to UNDERSTAND. Yelling and saying 'trust me' doesn't help people understand.
#72
Originally posted by Dyre
Man, you ask for a little tech behind something different and everyone gets all butt-hurt.
You guys need to check the egos at the door and disscuss, level-headed the tech behind this stuff. I would LOVE to learn some of this stuff, but every tech thread disenigrates into a damn flame war.
No-one is questioning your intelegences, or your accomplishments, they are just trying to UNDERSTAND. Yelling and saying 'trust me' doesn't help people understand.
Man, you ask for a little tech behind something different and everyone gets all butt-hurt.
You guys need to check the egos at the door and disscuss, level-headed the tech behind this stuff. I would LOVE to learn some of this stuff, but every tech thread disenigrates into a damn flame war.
No-one is questioning your intelegences, or your accomplishments, they are just trying to UNDERSTAND. Yelling and saying 'trust me' doesn't help people understand.
We should thank him for leting us see his port job, not many builders out there throw there port jobs in public. I am not saying it will work, nor saying it will!!
Sure it is crazy and out of the ordinary, but where we come from, EVERYTHING is out of the ordinary. I am sure that if it works, a lot of us will be experimenting with similar ports.
I don't think anybody is to blame,
Can I get a
![grouphug](https://www.rx7club.com/images/smilies/grouphug.gif)
#73
Definetly like to see the dyno sheet from that. If the torque doesn't change to much that might be a good port for me to use on my FP car. Tell me if I'm wrong but it looks like you just removed the bridge between the ports and smoothed the piece between the ports. Seems simple enough and hopefully effective. Good luck.
#74
Lives on the Forum
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Originally posted by Judge Ito
Listen Ted, there is so many forum members that I didn't think you were aware of my work. I have nothing personal with anybody in here. I just like to visit the forum and try to help a minute or so.When I posted some of my accomplishments I was under the impression you did not know anything about me. Wasn't personal. I come to this forum to share info. and to read info. Peace and glad to read everything is ok.
Listen Ted, there is so many forum members that I didn't think you were aware of my work. I have nothing personal with anybody in here. I just like to visit the forum and try to help a minute or so.When I posted some of my accomplishments I was under the impression you did not know anything about me. Wasn't personal. I come to this forum to share info. and to read info. Peace and glad to read everything is ok.
![Big Grin](https://www.rx7club.com/images/smilies/biggrin.gif)
Your work has been notable at least!  There is so much trash on here, and your stuff is definitely not trash.  I respect very few people in here, but you're on the list (added to RICE RACING) as cutting-edge rotary enthusiasts.
I apologize for the misunderstanding - I take the majority of posts with a grain of salt, so thus the condescending manner.  Once you explanations were provided, I have no problem with the thread or your work.  Good luck with the goals on the engine.
I really do envy your position, and you're able to work on some of the fastest rotary cars in the U.S.  It's been difficult on my side due to money contraints, but I've got a few big projects (customer cars) coming out soon hopefully.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
-Ted
#75
Lives on the Forum
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Originally posted by KNONFS
We should thank him for leting us see his port job, not many builders out there throw there port jobs in public. I am not saying it will work, nor saying it will!!
We should thank him for leting us see his port job, not many builders out there throw there port jobs in public. I am not saying it will work, nor saying it will!!
I've never seen information like this posts so freely on the subject.  I'd bet you'd never find stuff like this no where else.
Man Judge Ito, you got *****.
![Smilie](https://www.rx7club.com/images/smilies/smile.gif)
-Ted