MY 7 :) (the project)
04-01-05, 11:25 AM
#1
no more verty!...**(
Thread Starter
Join Date: Oct 2004
Location: fort bragg north carolina
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
MY 7 :) (the project)
well as everyone knows... well most of you anyways.. that i recently moved to texas from kansas in feb, and i made two trips to texas.. well the second time that i got back to texas my afm went out 
which i knew that it would sooner or later just didnt know when, well chriptopher noticed that my 5th and 6th ports where glued closed and that it would be good to go ahead and do the rats nest removel, and also do the tb mod.(which have been done for a couple of weeks now)(& christopher done all the work on the car i helped as much as i could) wed.. i finally got my afm put it into the 7 then fired her up.. and too my surprize that she fired up so well.. 
my 7 is finally running like a dream.. but i havent driven it yet because we are doing the brake lines and we have to order then in from victoria british so i have to wait a bit longer... but here are some pics that were taken while we was doing all of this..
which i knew that it would sooner or later just didnt know when, well chriptopher noticed that my 5th and 6th ports where glued closed and that it would be good to go ahead and do the rats nest removel, and also do the tb mod.(which have been done for a couple of weeks now)(& christopher done all the work on the car i helped as much as i could) wed.. i finally got my afm put it into the 7 then fired her up.. and too my surprize that she fired up so well.. my 7 is finally running like a dream.. but i havent driven it yet because we are doing the brake lines and we have to order then in from victoria british so i have to wait a bit longer... but here are some pics that were taken while we was doing all of this..
Trending Topics
04-02-05, 08:37 PM
#8
Passing life by
I am not sure if you were exspectign your 6pt to work or not but I know u got headers and your ACV is removed with that setup they wont work. You can remove htem and wire htem open. If the yare stuck you can try tapping on the top with a hammer and see if they free up then coat in WD40 and reatempt and see the results if none you will have to take them apart. Or search for opening with air pump silverrotor did this and has a nice write up I think in the arcive. But good luck on your 7 glad your modding it.
Thread
Thread Starter
Forum
Replies
Last Post