My 1/8 mile times.
#1
Rotary Freak
Thread Starter
My 1/8 mile times.
First run I ever ran at the track with a badly slipping clutc
reaction .9
60ft 2.2
mph 73 at 8500 rpm or 8000 rpm on S-AFC
ET 9.8
So Yeah I got a 9.8 on a horrible clutch so Im pretty stoked. Hoping for 9.6 when I go back with a new clutch kit. Other three runs sucked because my filter fell off right before I ran. Also the clutch was getting way to bad.
1st gear was cake so was the launch but when I shift to second the tack stays so I completly let off the gas and got back on real fast three times. This majorly effected my times so Im really looking forowered to going back when I get my better clutch.
By the way. I will caclulate my actual rpm tomorow according to my mph to see wich is more accurate (s-afc or tack)
reaction .9
60ft 2.2
mph 73 at 8500 rpm or 8000 rpm on S-AFC
ET 9.8
So Yeah I got a 9.8 on a horrible clutch so Im pretty stoked. Hoping for 9.6 when I go back with a new clutch kit. Other three runs sucked because my filter fell off right before I ran. Also the clutch was getting way to bad.
1st gear was cake so was the launch but when I shift to second the tack stays so I completly let off the gas and got back on real fast three times. This majorly effected my times so Im really looking forowered to going back when I get my better clutch.
By the way. I will caclulate my actual rpm tomorow according to my mph to see wich is more accurate (s-afc or tack)
#2
Rotary Freak
Thread Starter
Tecknically a 9.8 with my good 3rd gear and others who have ran a 9.8 with 3rd gears as good or worse have done a 14.9-14.8 with that 1/8 mile run. One example was my friends integra ls that ran 9.9 and 14.9
#4
Rotary Freak
Thread Starter
Ok with a 4.1 gear ratio and 2.00 something tranz ratio and 24.7 or 9 tire diameter the STOCK tack at 71.08 mph should read 8000 rpms. Mine reads 8500.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM
NCross
1st Generation Specific (1979-1985)
9
08-29-15 01:55 PM
stickmantijuana
20B Forum
8
08-18-15 02:46 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM